The optimization of retarding regimes within the particular group of cuts
DOI:
https://doi.org/10.15802/stp2013/9582Keywords:
hump, cut, retarding regime, interval, retarderAbstract
Purpose. The purpose is the improvement of the method of choosing the retarding regimes of cut rolling within the particular group in order to increase the quality of interval speed control of cuts at the automated hump. Methodology. Simulation method was used for research the trains’ breaking up process at the hump. Findings. The separation conditions of cuts within the particular group and their relation between the retarding regimes of cut control based on a system approach were studied. Interval between cuts within the particular group at the switches and retarders were considered simultaneously. The features of interval controlling at the classification humps with different mutual alignment of the first switch and master retarder were stressed. Originality. The researches found out that during optimization of the retarding regimes of cuts within the particular group one should provide the best conditions of cuts separation at the switches and retarders. Practical value. The problem of choosing the retarding regimes of cuts within the particular group is optimized formally. This retarding regime allows maximizing the minimum value of interval between cuts within the group.
References
Bobrovskiy V.I., Rogov N.V. Optimizatsiya rezhimov regulirovaniya skorosti ottsepov pri rospuske sostavov na gorkakh [Optimization of speed control modes of cuts during the train breaking-up on the hump]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Laz-aryan], 2004, no. 4, pp. 174-182.
Bobrovskiy V.I., Kudryashov A.V. Sovershenstvovaniye metodiki optimizatsii rezhimov rasformirovaniya sostavov na gorkakh [The improvement of optimization method of trains breaking-up modes on the hump]. Zbirnyk naukovykh prats Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana «Transportni systemy ta tekhnolohii perevezen» [Bulletin of Dnipropetrovsk Na-tional University of Railway Transport named after Academician V. Lazaryan], 2011, no. 1, pp. 17-21.
Kozachenko D.M. Efektyvni rezhymy halmuvannia vidchepiv na sortuvalnykh hirkakh [The efficient braking modes of cuts on the hump]. Zbirnyk naukovykh prats Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana «Transportni systemy ta tekhnolohii perevezen» [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2011, no. 2, pp. 55-59.
Kozachenko D. M., Berezovyi M. I., Taranets O. I. Modeliuvannia roboty sortuvalnoi hirky v umovakh nevyznachenosti parametriv vidchepiv ta kharakterystyk navkolyshnoho seredovyshcha [The hump functioning simulation under undefined cut parameters and environmental conditions]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2007, no. 16, pp. 73-76.
Kozachenko D.N. Issledovaniye usloviy intervalnogo regulirovaniya skorosti skatyvaniya ottsepov na avtomatizirovannykh gorkakh [The researching of conditions of interval speed controlling of cut rolling down process on the automated humps]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, no. 34, pp. 46-50.
Kozachenko D. N. Kriteriy optimizatsii rezhimov tormozheniya ottsepov raschetnoy gruppy v usloviyakh deystviya sluchaynykh faktorov [The optimization criteria of braking modes of cuts of design group under conditions of random factors effecting]. Zbirnyk naukovykh prats Donetskoho instytutu zaliznychnoho transportu ukrainskoi derzhavnoi akademii zaliznychnoho transportu [Bulletin of Donetsk Railway Transport Institute of Ukrainian State Academy of Railway Transport], 2010, no. 23, pp. 14-21.
Bobrovskiy V.I, Kozachenko D.N., Bozhko N.P., Rogov N.V., Berezovyy N.I., Kudryashov A.V. Optimizatsiya rezhimov tormozheniya ottsepov na sortirovochnykh gorkakh [The optimization of cuts’ braking modes on the humps]. Dnepropetrovsk, Makovetskiy Publ., 2010. 260 p.
Jing ming YAO, Xue ren LI, Hu xing LIU. Study on Neural Network Based Space-interval Speed-control Model. China Railway Science, 2001, no. 02, pp. 127-133.
Wan-an XU, Xuan SHI, Tong-yuan LIN. Calculating Exit Speed of Rolling Cuts Based on Fuzzy Neural Networks. China Railway Science, 2001, no. 03, pp. 161-165.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
