Repair technology of hydro-technical buildings

Authors

  • E. V. Anufryeva Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine

DOI:

https://doi.org/10.15802/stp2011/9478

Keywords:

supporting power of structures, density, pneumatic jet method of repair and recovery

Abstract

The article is dealt with basic statements of the developed technology of recovering the supporting power of transport and hydraulic structures. The proposed pneumatic jet method of repair and recovery of the supporting power of transport and hydraulic structures permits saving 30…40 per cent of cement, increasing the cement density and hence decreasing the mass of structures.

Author Biography

E. V. Anufryeva, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Е. В. Ануфриева

Downloads

Published

2011-06-25

How to Cite

Anufryeva, E. V. (2011). Repair technology of hydro-technical buildings. Science and Transport Progress, (37), 143–145. https://doi.org/10.15802/stp2011/9478

Issue

No. 37 (2011): ISSUE 37

Section

TRANSPORT CONSTRUCTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.