AUTOMATED MEASURING COMPLEX FOR ACCEPTANCE TESTING OF DC AND UNDULATED-CURRENT TRACTION MOTORS
DOI:
https://doi.org/10.15802/stp2016/90482Keywords:
qualification tests of traction motors, loading-back stand, measuring system, functional diagramAbstract
Purpose. In the paper it is necessary: 1) to familiarize the reader with the modern classification of measurement and diagnostics, familiarize with problems of automating the measurement of basic parameters during program execution of qualification tests of traction motors; 2) to make recommendations to improve the measurement ac-curacy, reduce labor intensity of work for carrying out measurements, and reduce the requirements for the qualification of the staff; 3) to provide practical implementation of measurement system, built on the basis of the practical recommendations contained in the article. Methodology. The work presents the classification of measurement and diagnostic tools. The author considered a list of equipment that can be used in measurement systems, as well as third-party options for measuring complex and measuring complex using stand management system. Their functional schemes were proposed. The author compared the advantages and disadvantages of these schemes to make recommendations on areas of their optimal use. Findings. Having analyzed the functional scheme of measuring systems, it was found that the use of the control system microcontroller as a measuring complex is expedient if the measurements have largely a test process control function. The use of a third-party measuring complex is more appropriate in cases when it is required: to eliminate dependence on the stand management system, to provide high mobility and reduce the requirements for the qualification of the staff. Originality. The work presents a brief over-view of the measurement means. The author developed the functional schemes of measuring systems using stand management system and third-party measuring complex, proposed the criteria for evaluating their optimal use. Practical value. Based on the proposed functional diagram, the measuring system on National Instruments hard-ware and software basis was set up. The sensors by LEM Company were used as primary transducers for the measurement of currents and voltages. Thanks to chassis compact size, it was united in one body with the power supply for sensors. Thus, it was possible to reduce the size of the entire complex, simplify and speed up its preparations for the measurements.
References
Ayficher, E. S., & Dzhervis, B. U. (2008). Tsifrovaya obrabotka signalov: Prakticheskiy podkhod. Moscow: Vilyams.
Afanasov, A. M. (2012). Sistemy vzaimnogo nagruzheniya tyagovykh elektricheskikh mashin postoyannogo i pulsiruyushchego toka. Dnepropetrovsk: Makovetskiy.
GOST 2582-81. Mashiny elektricheskiye vrashchayushchiesya tyagovyye. Obshchiye tekhnicheskiye usloviya (1981). Moscow: Izdatelstvo standartov.
Datchiki LEM (2016). Retrieved from http://www.lem.com/ru/ru
Kuznetsov, V. H., Kyryliuk, T. I., & Serhatyi, Y. M. (2011). Eksperymentalne doslidzhennia «umovnykh vtrat» elektroenerhii v tiahovii merezhi. Vostochno-Yevropeyskiy zhurnal peredovykh tekhnologiy – Eastern-European Journal of Enterprise Technologies, 4/8, 29-33.
LabVIEW (2016). Retrieved from http://www.labview.ru/products/27/n
Loza, P. O. (2008). Pokrashchennia enerhetychnykh vlastyvostei stenda dlia vyprobuvan kolektornykh tiahovykh dvyhuniv lokomotyviv. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana, 22, 69-71.
Moduli cDAQ (2016). Retrieved from http://www.labview.ru/products/195
NI CompactDAQ-zakonchennyye USB-ili Ethernet-sistemy sbora dannykh, prednaznachennyye kak dlya izmereniy signalov, tak i dlya upravleniya tekhnologicheskimi protsessami (2016). Retrieved from http://www.labview.ru/products/193
NI CompactRIO – nedorogaya rekonfiguriruyemaya platforma upravleniya i sbora dannykh dlya prilozheniy, trebuyushchikh vysokoy proizvoditelnosti i nadezhnosti (2016). Retrieved from http://www.labview.ru/products/185
Pravyla remontu elektrychnykh mashyn elektrovoziv i elektropoizdiv. TsT-0204 (2012). Kyiv: SAM.
Castaneda, C. E., & Esquivel, P. (2010). Direct current motor control based on high order neural networks using stochastic estimation – Neural Networks (IJCNN). Paper presented at The 2010 Intern. Joint Conference on Neural Networks (IJCNNI), Barcelona.
Castaneda, C. E., Loukianov, A. G., Sanchez, E. N., & Bernardino, C. T. (2012). Discrete-Time Neural Sliding-Mode Block Control for a DC Motor With Controlled Flux. IEEE Transactions on Industrial Electronics, 59(2), 1194-1207. doi:10.1109/TIE.2011.2161246
Hayek, E. J., Sobczyk, T. J., & Skarpetowski, G. (2010). Experiences with a traction drive laboratory model. Electromotion, 17(1), 30-36.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
