Amorphous coating forming in the conditions of gas thermal spraying
DOI:
https://doi.org/10.15802/stp2010/8920Keywords:
amorphous detonation coating, gas thermal spraying, metallic alloyAbstract
In the article the issues of forming amorphous coatings in the conditions of gas thermal spraying of coating are considered. On the basis of theoretical analysis the technological factors, determining possibility of obtaining the amorphous coatings at detonation spraying, are formulated. Two groups of factors, influencing on formation of amorphous structure in detonation sprayed coatings from metallic alloys, are marked.Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.