Structural transformation during cold deformed carbon steel tempering

Authors

  • I. O. Vakulenko Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine

DOI:

https://doi.org/10.15802/stp2010/8915

Keywords:

cold-deformed carbon steel, plastic deformation, temper, structure, yielding stress, ferrite grain, second phase

Abstract

The influence of parameters of degree of plastic deformation for 30…80 % and subsequent temper on the structure and yielding stress in the microyield region of preimproved carbon steels has been studied. The classification of dispersed phase of ferrite into two types containing the high angle boundaries and substructure boundaries respectively in relation to steels has been discussed.

Author Biography

I. O. Vakulenko, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

I. O. Vakulenko

Downloads

Published

2010-12-25

How to Cite

Vakulenko, I. O. (2010). Structural transformation during cold deformed carbon steel tempering. Science and Transport Progress, (35), 202–206. https://doi.org/10.15802/stp2010/8915

Issue

No. 35 (2010): ISSUE 35

Section

MATERIAL SCIENCE

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.