Modeling influence of rolling bearing bush and vibration damping in catching of toothed wheels

Authors

  • P. V. Diachenko Cherkasy, the state technological university, Ukraine

DOI:

https://doi.org/10.15802/stp2011/8882

Keywords:

dynamic scheme of toothing, constructive parameters of radial bearings, antifriction bearing, simulation modeling, Simulink, MathCad

Abstract

On the base of dynamic scheme of toothing, a mathematical model for study of the influence of constructive parameters of radial bearings such as a factor of friction, reduced masses and stiffnesses on damping the vibrations in gearing is developed. The solution for the model is obtained using a simulation modeling in the Simulink environment with checking the validity of results in the system MathCad. The oscillograms of the vibrations under investigation and the conclusions on the base of their analysis are presented.

Author Biography

P. V. Diachenko, Cherkasy, the state technological university

П. В. Дяченко

Downloads

Published

2011-03-25

How to Cite

Diachenko, P. V. (2011). Modeling influence of rolling bearing bush and vibration damping in catching of toothed wheels. Science and Transport Progress, (36), 16–24. https://doi.org/10.15802/stp2011/8882

Issue

No. 36 (2011): ISSUE 36

Section

ROLLING STOCK AND TRAIN TRACTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.