STUDY OF TECHNICAL STATE IMPACT OF BRAKE RETARDERS AT THE PROCESSING ABILITY OF HUMPS
DOI:
https://doi.org/10.15802/stp2016/77878Keywords:
hump, car retarder, train traffic safety, humping process, estimated capacity of a humpAbstract
Purpose. The research aims development of methods for calculating the estimated capacity humps for the loss conditions of brake power retarders. Methodology. The operation of humps is connected with large number of random factors, such as the characteristics of cuts, environmental conditions, the value of braking power implemented by retardants and others. In this regard, to research the set tasks the methods of simulation modeling and mathematical statistics are used. Determination of speed and motion time of cuts on the routes is carried out on the basis of rolling down modeling of their rolling down from the humps. Findings. If the brake power of retarders of the rolling down part of humps is not enough to stop the cuts, it should be provided the intervals during break-up to release the rolling routes from the preliminary cuts. The dependencies allowing to set the duration of these intervals were determined using the methods of the probability theory If the brake power of retarders at the rolling down part of humps and at the classification tracks is not enough to meet the requirements of the aimed regulation of the cuts rolling speed, it is necessary the use the additional brake shoes. The work develops the methods that on the basis of simulation modeling of the humping process allow one to set the desired value of the break-up duration increase. They ensure the traffic safety at the given number of car motion speed regulators. Originality. Authors firstly proposed the improved methods for determining the estimated capacity of humps. Unlike the existing ones, allow taking into account the technological limitations caused by the requirements of the humping process safety and can be used to assess the performance of the humps in the conditions of parametric failures of the retarders. Practical value. The use of the proposed methods allows assessing the influence of the retarders’ disrepair on the performance degradation of humps for the existing volumes of work.
References
Berezovyy N.I., Malashkin V.V., Bozhko N.P. Kompleksnoye proyektirovaniye prodolnogo i poperechnogo profilya sortirovochnykh gorok [Integrated design of longitudinal and transverse profile of marshalling yards]. Transportnі systemy ta tekhnolohii perevezen [Transport sytems and transportations technologies], 2014, vol. 7, pp. 5-9.
Bobrovskiy V.I. Opredeleniye veroyatnostey razdeleniya ottsepov na strelkakh sortirovochnoy gorki [Definition of cuts separation probabilities at the the switches of marshalling yard]. Voprosy mekhanizatsii i avtomatizatsii sortirovochnogo protsessa na stantsiyakh [Problems of mechanization and automation of the marshalling process at the stations], 1976, vol. 181/10, pp. 56-63.
Bolvanovska T.V. Rozrakhunok pererobnoi spromozhnosti sortuvalnykh kompleksiv [Calculation of the estimated capacity of the marshalling complexes]. Transportnі systemy ta tekhnolohii perevezen [Transport sytems and transportations technologies], 2014, vol. 8, pp. 27-34.
HBN V.2.3-37472062-1:2012. Haluzevi budivelni normy Ukrainy. Sporudy transportu. Sortuvalni prystroi zaliznyts. Normy proektuvannia [Design codes HBN V.2.3-37472062-1:2012. Branch building norms ofUkraine. Transport facilities. Sorting devices of railways. design standards]. Kyiv, Ministerstvo infrastruktury Ukrainy Publ., 2012. 112 p.
Zhuravel V.V. Vplyv naiavnosti vahoniv, yaki zaboroneno spuskaty z hirky, na protses rozpusku sostaviv [The influence of the occurrence of the cars which are forbidden to break-up on the hump on the breaking-up process]. Vostochno-Yevropeyskiy zhurnal peredovykh tekhnologiy – East-European Journal of Advanced Technologies, 2012, no. 4/3 (58), pp. 38-44.
Verhun O.F., Lypovets N.V., Boholii V.M. Instruktsiia z rozrakhunku naiavnoi propusknoi spromozhnosti zaliznyts Ukrainy TsD-0036 [Instructions for calculating the available capacity of railways of Ukraine TsD-0036]. Kyiv, Transport Ukrainy Publ., 2002. 376 p.
Kozachenko D.M., Levytskyi I.Yu., Bolvanovska T.V. Doslidzhennia vplyvu shvydkosti rozpusku sostaviv na pererobnu spromozhnist sortuvalnykh hirok [Investigation of influence of rate of breaking uip of train sets on processing capacity of marshalling hump yards]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, vol. 41, pp. 61-63.
Kozachenko D.M., Berezovyi M.I., Korobiova R.H. Optymizatsiia rozpodilu sortuvalnykh kolii mizh pryznachenniamy planu formuvannia [The optimization of distribution sorting tracks between the assignment plan formation]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2008, vol. 22, pp. 52-55.
Lisenkov V.M. Statisticheskaya teoriya bezopasnosti dvizheniya poyezdov [Statistical theory of train traffic safety].Moscow, VINITI RAN Publ., 1999. 332 p.
Metodychni vkazivky z rozrakhunku norm chasu na manevrovi roboty, yaki vykonuiutsia na zaliznychnomu transporti: nakaz Ukrzaliznytsi 25.03.2003 r. № 0-72/ TsZ [Guidelines for the calculation of standard time for shunting work performed on railway transport: UZ order 25.03.2003. 0-72/TsZ]. 82 p.
Modin N.K. Bezopasnost funktsionirovaniya gorochnykh ustroystv [Functioning safety of marshalling devices].Moscow, Transport Publ., 1995. 173 p.
Ohar O.M., Rozsokha O.V., Kostiennikov O.M. Vyznachennia intensyvnostei vidmov ta vidnovlennia pidsystem sortuvalnoi hirky [Defining of the failure rate and recovery of marshalling yard subsystems]. Informatsiino-keruiuchi systemy na zaliznychnomu transporti – Information and control systems on railway transport, 2012, no. 3, pp. 3-12.
Negrey V.Ya., Pozhidayev S.A., Filatov Ye.A. Obosnovaniye urovnya tekhnicheskogo osnashcheniya i optimizatsiya parametrov konstruktsii sortirovochnykh kompleksov zheleznodorozhnykh stantsiy [Justification of the level of technical equipment and optimization of the design parameters of sorting complexes for railway stations]. Transportnі systemy ta tekhnolohii perevezen [Transport sytems and transportations technologies], 2014, vol. 8, pp. 110-119.
Ostrovskiy A.M., Lisyutin A.M. Propusk vagonov s opasnymi gruzami cherez sortirovochnyye gorki [Pass of cars with dangerous freights through the marshalling yard]. Sbornik nauchnykh trudov SWorld [Proc. SWorld], 2012, vol. 2, no. 1, pp. 38-41.
Kozachenko D.M., Bobrovskyi V.I., Grevtsov S.V., Berezovyi M.I. Controlling the speed of rolling cuts in condition of reduction of brake power of car retarders. Nauka ta prohres Transportu – Science and Transport Progress, 2016, no. 3(63), pp. 28-40. doi: 10.15802/stp2016/74710
Pepevnik A., Bogović B. The railway traffic shunting system. Promet, 2003, vol. 15, no. 3, pp. 177-184.
Zarecky S., Grun J., Zilka J. The newest trends in marshalling yards automation. Transport Problems, 2008, tom 3, vol. 4, part 1, pp. 87-95.
Zhang C., Li Y. Analysis of Over-speed Coupling Accidents on Hump based on Fuzzy Petri Net. Proc. of 2010 IEEE the 17th Intern. Conf. on Industrial Industrial Engineering and Engineering Management, 2010, pp. 1014-1018. doi: 10.1109/ICIEEM.2010.5646453.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
