The structure and producting technology are developed for rolled and casting of aluminum ingots with carbonitride reinforcement for new generation carriages

Authors

  • U. S. Proidak Dnepropetrovsk, national metallurgical academy, Ukraine
  • A. V. Rabynovych Dnepropetrovsk, national metallurgical academy, Ukraine
  • H. N. Trehubenko Dnepropetrovsk, national metallurgical academy, Ukraine
  • U. A. Bublykiv Dnepropetrovsk, national metallurgical academy, Ukraine
  • H. A. Poliakov Dnepropetrovsk, national metallurgical academy, Ukraine
  • A. A. Katrych Dnepropetrovsk, national metallurgical academy, Ukraine
  • A. V. Puchikov Dnepropetrovsk, ICHM NAS of Ukraine, Ukraine

DOI:

https://doi.org/10.15802/stp2011/6845

Keywords:

steel, casting, rolling, wagons

Abstract

The composition and manufacturing technology for steel rolling and casting products for the new generation wagons are developed. The level of properties of metal production meets the recommendations of the International Conference “Zheldormashinostroenie” (Shcherbinka, 29-30.06.2004). This is achieved by a complex microalloying the base steels with nitrogen, titanium and aluminum in the ratios ensuring the formation of uniformly distributed carbonitride and nitride nanophases and stable fine-grained structure (≥ 8 points in the casting and ≥ 9 points in the rolling).

Author Biographies

U. S. Proidak, Dnepropetrovsk, national metallurgical academy

Ю. С. Пройдак

A. V. Rabynovych, Dnepropetrovsk, national metallurgical academy

А. В. Рабинович

H. N. Trehubenko, Dnepropetrovsk, national metallurgical academy

Г. Н. Трегубенко

U. A. Bublykiv, Dnepropetrovsk, national metallurgical academy

Ю. А. Бубликів

H. A. Poliakov, Dnepropetrovsk, national metallurgical academy

Г. А. Поляков

A. A. Katrych, Dnepropetrovsk, national metallurgical academy

А. А. Катрич

A. V. Puchikov, Dnepropetrovsk, ICHM NAS of Ukraine

А. В. Пучіков

Downloads

Published

2011-09-25

How to Cite

Proidak, U. S., Rabynovych, A. V., Trehubenko, H. N., Bublykiv, U. A., Poliakov, H. A., Katrych, A. A., & Puchikov, A. V. (2011). The structure and producting technology are developed for rolled and casting of aluminum ingots with carbonitride reinforcement for new generation carriages. Science and Transport Progress, (38), 225–228. https://doi.org/10.15802/stp2011/6845

Issue

No. 38 (2011): ISSUE 38

Section

MATERIAL SCIENCE

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.