Specification method is for actuation setpoint of protectors from short completions in power circuits of electric motive power

Authors

DOI:

https://doi.org/10.15802/stp2011/6813

Keywords:

short circuit, setpoint, proof equipment, rate of increasing the current, electric-traction motor

Abstract

The issue of determination of minimum value of triggering setpoint by the rate of increasing the current for the short-circuit proof equipment in power circuits of the electric-traction rolling stock is considered in the article.

Author Biography

O. O. Karzova, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

О. О. Карзова

Downloads

Published

2011-09-25

How to Cite

Karzova, O. O. (2011). Specification method is for actuation setpoint of protectors from short completions in power circuits of electric motive power. Science and Transport Progress, (38), 90–94. https://doi.org/10.15802/stp2011/6813

Issue

No. 38 (2011): ISSUE 38

Section

ELECTRIC TRANSPORT, POWER SYSTEMS AND COMPLEXES

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.