ENERGY EFFICIENCY OF DIESEL LOCOMOTIVE HYDRAULIC TRANSMISSION TESTS AT LOCOMOTIVE REPAIR PLANT
DOI:
https://doi.org/10.15802/stp2015/57000Keywords:
hydraulic transmission, hydraulic testing, test stand, drive motor, load generator, additional motorAbstract
Purpose. In difficult economic conditions, cost reduction of electricity consumption for the needs of production is an urgent task for the country’s industrial enterprises. Technical specifications of enterprises, which repair diesel locomotive hydraulic transmission, recommend conducting a certain amount of evaluation and regulatory tests to monitor their condition after repair. Experience shows that a significant portion of hydraulic transmission defects is revealed by bench tests. The advantages of bench tests include the ability to detect defects after repair, ease of maintenance of the hydraulic transmission and relatively low labour intensity for eliminating defects. The quality of these tests results in the transmission resource and its efficiency. Improvement of the technology of plant post-repairs hydraulic tests in order to reduce electricity consumption while testing. Methodology. The possible options for hydraulic transmission test bench improvement were analysed. There was proposed an energy efficiency method for diesel locomotive hydraulic transmission testing in locomotive repair plant environment. This is achieved by installing additional drive motor which receives power from the load generator. Findings. Based on the conducted analysis the necessity of improving the plant stand testing of hydraulic transmission was proved. The variants of the stand modernization were examined. The test stand modernization analysis was conducted. Originality. The possibility of using electric power load generator to power the stand electric drive motor or the additional drive motor was theoretically substantiated. Practical value. A variant of hydraulic transmission test stand based on the mutual load method was proposed. Using this method increases the hydraulic transmission load range and power consumption by stand remains unchanged. The additional drive motor will increase the speed of the input shaft that in its turn wil allow testing in closer to real conditions as a result of increased load on the hydraulic transmission. Increased load on the hydraulic transmission will help to detect possible defects and hence will improve the quality of transmission repairs.
References
Afanasov A.M. Vyznachennia ratsionalnykh rezhymiv vzaiemnoho navantazhennia tiahovykh dvyhuniv elektrorukhomoho skladu mahistralnoho ta promyslovoho transportu [Rational modes determination of traction motors loading-back for electric rolling stock in mainline and industrial transport]. Nauka ta prohres transportu. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu – Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2014, no. 4 (52), pp. 67-74. doi: 10.15802/stp2014/27322.
Afanasov A.M. Rehuliuvannia nebalansnoho elektromahnitnoho momentu v systemakh vzaiemnoho navantazhennia elektrychnykh mashyn tiahovoho ta motorvahonnoho rukhomoho skladu mahistralnoho ta promyslovoho transportu [Regulation of unbalanced electromagnetic moment in mutual loading systems of electric machines of traction rolling stock and multiple unit of mainline and industrial transport]. Nauka ta prohres transportu. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu – Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2014, no. 6 (54), pp. 70-77. doi: 10.15802/stp2014/32965.
Afanasov A.M. Rozvytok naukovykh osnov vdoskonalennia enerhoefektyvnykh metodiv vyprobuvannia tiahovykh elektrychnykh mashyn postiinoho ta pulsuiuchoho strumu. Avtoreferat Diss. [Scientific foundations development of energy efficiency test methods improvement of traction electric machines of direct and pulsating current. Author’s absract]. Dnipropetrovsk, 2013. 36 p.
Afanasov A.M. Sistemy vzaimnogo nagruzheniya tyagovykh elektricheskikh mashin postoyannogo i pulsiruyushchego toka [Mutual loading systems of traction electric machines of direct and pulsating current]. Dnipropetrovsk, Makovetskiy Publ., 2012. 248 p.
Bodnar B.Ye., Ochkasov O.B., Koreniuk R.O. Pidvyshchennia enerhoefektyvnosti vyprobuvannia hidravlichnykh peredach teplovoziv [Test energy efficiency increase of hydraulic transmission locomotive]. Tezy Vseukrainskoi naukovo-tekhnichnoi konferentsii molodykh vchenykh, mahistrantiv ta studentiv: sektsiia «Mekhanika», «Naukovo-tekhnichnyi prohres na transporti» [Theses of All-Ukrainian scientfic and technical Conf. of young scientists and graduate students: section «Mechanics», «Scientific and Technological Progress on Transport»]. Dnipropetrovsk, 2015, pp. 60-61.
Bodnar B.Ye. Teoreticheskiye osnovy, opyt sozdaniya sistem ispytaniya i diagnostirovaniya teplovozov s gidrodinamicheskoy peredachey. Dokt. Diss. [Theoretical foundations, experience of test and diagnostics systems creation of locomotives with hydrodynamic transmission. Doct. Diss.]. Dnepropetrovsk, 1996. 375 p.
Bodnar B.Ye., Kapitsa M.I., Kuznetsov T.F., Lyashuk V.M. Issledovaniya dvizheniya valov gidroperedachi pri svobodnom vrashchenii [Motion studies of hydraulic transmission shafts at free rotatation]. Puti povysheniya nadezhnosti i ekonomichnosti teplovozov: mezhvuzovskiy sbornik nauchnykh trudov [Ways to improve the reliability and efficiency of locomotives: Interacademic Proc.]. Dnipropetrovsk, 1987, issue 256/10, pp. 56-61.
Kapitsa M.I., Minchuk V.P., Korenyuk R.A. Opredeleniye velichiny teplovykh poter pri ispytanii teplovoznoy gidrodinamicheskoy peredachi v rezhime «vybega» [Determination of heat losses at the diesel hydrodynamic transmission test in the «runaway» regime]. Visnyk Skhidnoukrainskoho natsionalnoho universytetu im. V. Dalia [Bulletin of Volodymyr Dahl East Ukrainian National University]. 2013, issue 18, pp. 13-16.
Lyashuk V.M. Informatsionno – diagnosticheskaya sistema ispytaniy teplovozov s gidrodinamicheskoy peredachey na baze mikro–EVM [Information and diagnostic tests system of locomotives with hydrodynamic transmission on the base of micro-computer]. Puti povysheniya nadezhnosti i ekonomichnosti teplovozov: mezhvuzovskiy sbornik nauchnykh trudov [Ways to improve the reliability and efficiency of locomotives: Interacademic Proc.]. Dnepropetrovsk, 1987, issue 256/10, pp. 44-52.
Ovchinnikov V.M., Khalimanchik V.A., Nevzorov V.V. Gidravlicheskiye peredachi teplovozov [Hydraulic transmissions of locomotives]. Gomel, BelGUT Publ., 2006. 155 p.
Ochkasov O.B., Koreniuk R.O., Parfonov O.S. Udoskonalennia vyprobuvannia hidravlichnykh peredach teplovoziv [Testing hydraulic transmission improvement of locomotives]. Tezy Vseukrainskoi naukovotekhnichnoi konferentsii molodykh vchenykh, mahistrantiv ta studentiv: sektsiia «Mekhanika», «Naukovotekhnichnyi prohres na transporti» [Theses of All-Ukrainian scientific and technical Conf. of young scientists and graduate students: section «Mechanics», «Scientific and technological progress on Transport»]. Dnipropetrovsk, 2014, pp. 74-75.
Bodnar B.Ye., Minchuk V.P., Ochkasov O.B., Koreniuk R.O. Udoskonalennia stendu vyprobuvannia hidravlichnykh peredach teplovoziv [Test stand improvement of hydraulic transmission in locomotives]. Tezy 75 Mizhnarodnoi naukovo-praktychnoi konferentsii: sektsiia «Ekspluatatsiia ta remont lokomotyviv», «Problemy ta perspektyvy rozvytku zaliznychnoho transportu» [Proc. of 75th Intern. Sci. And Practical Conf.: section «Maintenance and repair of locomotives», «Problems and Prospects of Railway Transport Development»]. Dnipropetrovsk, 2015, pp. 23-24.
Castaneda С.Е., Loukianov A.G., Sanchez E.N., Castillo-Toledo B. Discrete-Time Neural Sliding-Mode Block Control for a DC Motor With Controlled Flux. IEEE Transactions. Industrial Electronics, 2012, vol. 59, issue 2, pp. 1194-1207. doi: 10.1109/tie.2011.2161246.
Hayek J. El., Sobczyk T.J., G. Skarpetowski. Experiences with traction drive laboratory model. Electromotion, 2010, vol. 17, issue 1, pp. 30-36.
Liu Y., Eberle W. Developments in Switching Mode Supply Technologies. IEEE Canadian Review. Switching Mode Power Supplies. Fall, 2009, no. 61, pp. 9-14.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
