THE THEORETICAL FOUNDATIONS OF VIBRATION DAMPERS BY ROLLING FRICTION
DOI:
https://doi.org/10.15802/stp2015/49228Keywords:
vibrations, damping, rod, friction, suppression, bearings, shock absorbersAbstract
Purpose. There are some unresolved issues in vibration damping – the lack of engineering calculations for the vibration dampers by rolling friction; the absence of evidence of their application appropriateness. Considering this fact, the authors suggest to prove that the dampers based on rolling friction, are similar in rate of oscillation damping by hydraulic shock absorbers. At the same time, they are easier for the hydraulic design, and easily amenable to manual adjustment, both in automatic and manual mode. Methodology. Fixed techniques of practice in order to determine amplitudes of the oscillations of a shock absorber led to a predetermined result and will apply this theory in the calculation of other vibration dampers. Findings. Analysis of the formulas and graphs leads to the following conclusions and recommendations: 1) the nature of the oscillation damping at vibration dampers by rolling friction is close to their decay in the viscous resistance; 2) when conducting the necessary experiments the shock absorber rolling can be recommended as alternatives to hydraulic ones. The research results of this task will help implement the new trend in reduction of dynamic loads in vehicles. Originality. With the help of theoretical curves to determine the coefficients of rolling friction the dependences for determining the amplitudes of the oscillations in the vertical movement of cargo were obtained. At the same time, the previously proposed analytical dependence for determining the coefficient of rolling friction contains only conventional mechanical constants of the contacting bodies and there geometrical dimensions. Practical value. Due to the existing well-known disadvantages of hydraulic shock absorbers it would be logical to apply shock absorbers that are technologically convenient in manufacturing and easy to adjust the damping rate. The proposed theory can be used in the design of shock absorbers rolling as an alternative to the hydraulic shock absorbers of machines.
References
Sakhno V.P., Bezborodova H.B., Maiak M.M., Sharai S.M. Avtomobili: tiahovo-shvidkisni vlastyvosti ta palyvna ekonomichnist [Cars: traction-speed characteristics and fuel efficiency]. Kyiv, Vydavnytstvo «KVShch», Publ., 2000. 174 p.
Bondarenko L.M., Dovbnia M.P., Loveikin V.S. Deformatsiini opory v mashynakh [The deformation of the support in cars]. Dnipropetrovsk,Dnipro-VAL Publ., 2002. 200 p.
Hashchuk M.P., Nikipchuk S.V. Zumovleni zvolozhenistiu dorohy, akustychnym vyprominiuvanniam ta prokovzuvanniam shyn skladovi koefitsiienta oporu kochenniu kolesa transportnoi mashyny [Сomponents of rolling resistance coefficient of a wheel in a transport vehicle due to road humidity, acoustic radiation and tire scrubbing]. Visnyk Natsionalnoho universytetu «Lvivska politekhnika». Dynamika, mitsnist ta proektuvannia mashyn i pryladiv [Bulletin of National University «Lviv Polytechnic». Dynamics, strength and design of machines and devices], 2012, no. 730, pp. 14-21.
Hashchuk P.M., Myskiv T.H. Teoriia avtomobilia: Koleso [The theory of the car: Wheel]. Lviv, Ukrainski tekhnolohii Publ., 2010. 254 p.
Hashchuk P.M., Nikinchuk S.V. Fenomenolohichne y modelne oznachennia poniattia «koefitsiient oporu kochenniu» kolesa transportnoi mashyny [Phenomenological model and the definition of «rolling resistance coefficient» of the vehicle wheel]. Visnyk Natsionalnoho universytetu «Lvivska politekhnika». Dynamika, mitsnist ta proektuvannia mashyn i pryladiv [Bulletin of National University «Lviv Polytechnic». Dynamics, strength and design of machines and devices], 2013, no. 759, pp. 16-25.
Dzhonson K. Mekhanika kontaktnogo vzaimodeystviya [Mechanics of contact interaction]. Moscow, MirPubl., 1989. 510 p.
Kuzmenko A.G. Metod podobiya v reshenii kontaktnykh zadach dlya dvoyakoy krivizny [Method of similarity in the solution of contact problems for double curvature]. Problemy trybolohii – ProblemsofTribology, 2008, no. 2, pp. 25-55.
Kuzmenko A.G. Plasticheskiy kontakt tel dvoyakoy krivizny [Plastic contact of double curvature bodies]. Problemy trybolohii – ProblemsofTribology, 2009, no. 1, pp. 46-64.
Kukhar V.V. Funktsionalnaya svyaz neravnomernosti deformatsii s koeffitsientom kontaktnogo treniya pri plasticheskoy osadke zagotovok [The functional relation of non-uniformity deformation with the coefficient of contact friction during plastic upsetting]. Problemy trybolohii – ProblemsofTribology, 2009, no. 1, pp. 91-96.
Bondarenko L.M., Yakovliev S.O., Kramar I.E., Shaptala O.I. Umovy kochennia bez prokovzuvannia til pry riznykh skhemakh dotyku [Conditions of rolling without slipping of the bodies under various schemes of touch]. Conduct of modern science 2014. Materials of X Scientific and Practical Conf. (30.11–7.12.2014),Sheffield, 2014, pp. 12-17.
Fufayev N.A. Prosteyshiye teorii kacheniya kolesa [The elementary theory of rolling wheels]. Gorkiy, GGU im. Lobachevskogo Publ., 1984, 27 p.
Reynolds O. On rulling friction. Philosophical Transactions of the Royal Society, 1875, vol. 166, pp. 155-174.
Mitschke M., Wallentowiz H. Dynamik der Kraftfahrzeuge. Berlin, Springer Publ., 2010. 709 p.
Tabor D. The mechnism of roeling friction: the elastic range. Proc. of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1955, vol. 229, issue 1177, pp. 198-220. doi: 10.1098/rspa.1955.0082.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
