INCREASE THE RESOURCE OF CURRENT COLLECTOR ELEMENTS OF THE ELECTRIFIED HIGH-SPEED TRANSPORT IN OPERATING CONDITIONS

Y. L. Bolshakov; A. V. Antonov

doi:10.15802/stp2015/49205

Authors

Y. L. Bolshakov GLORIYA LLC, Ukraine https://orcid.org/0000-0002-1513-2992
A. V. Antonov Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0001-5701-6087

DOI:

https://doi.org/10.15802/stp2015/49205

Keywords:

high-speed movement, collector elements, graphite, wear resistance, metal fibers, current carrying capacity, resource, diagnostic system, current collector skid

Abstract

Purpose. The paper is aimed to determinate the main ways of increasing resource efficiency and exploitation of coal current collector surface inserts of speed electric rolling stock. Methodology. The research is based on the technique relies on the use of theory regulations of technical systems reliability, electromechanical processes, theory of statistics. Findings. The existing approaches to the production of current collector surface inserts in Europe and Ukraine were considered, a number of information sources was analyzed. The most effective ways of increasing current carrying capacity and wear resistance of current collector elements were determined. It has been established that the existing system for determining the quality of manufacturing of current collector elements have a number of drawbacks that make it difficult to control the input and makes diagnosing current collecting elements in operation impossible. On the basis of the facts, for the needs of the locomotive depot, we propose a new booth allowing avoiding the existing difficulties with diagnosing of current collector elements. During the study were established pervasive transgressions of technological standards of service pantographs. Originality. Based on the results of operational research carried out on the basis of the locomotive depot, obtained depending, based on which, it is proposed to introduce an operative diagnosing system of the current collector elements state during operation. In the course of a comparative analysis of existing and perspective development directions of current collector elements with high load current carrying capacity and durability, were definited constructive conditions for the optimal ratio is inserts. It was established that a significant proportion of failures occur due to imperfect maintenance system for which, on the basis of operational data, recommendations were developed. Practical value. Obtained results of the information sources analysis determine the need to implement coal inserts copper component in material, which will increase the load current carrying capacity of the current collectors. The numerous shortcomings of existing diagnostic systems carbon of current collector inserts skids pantographs were established, the solution of them should be the basis for the development of new means and diagnostic systems of current collector elements. It can improve service life of inserts and arrange culling of substandard of current collector inserts. The imperfect system maintenance of pantographs was established. The requirements increasing to this system will significantly reduce the amount of breakages caused by an increased transitive resistance in the «insert – pantograph».

Author Biographies

Y. L. Bolshakov, GLORIYA LLC

Lenin Av., 108-a, Zaporizhzhia, Ukraine, 69004, tel. + 38 (0612) 34 80 45

A. V. Antonov, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep. «Power Supply of Railways», Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel. + 38 (056) 373 15 25

References

Berent V.Ya. Materialy i svoystva elektricheskikh kontaktov v ustroystvakh zheleznodorozhnogo transporta [Materials and properties of the electrical contacts in the devices of railway transport]. Moscow, Intekst Publ., 2005. 408 p.

Bolshakov Yu.L., Gershman I.S., Sychenko V.G. K voprosu vybora ratsionalnoy formy profilya kontaktnykh vstavok tokopriemnikov elektropodvizhnogo sostava [On the choosing the rational form of the profile of the contact inserts while the electric rolling stock]. Zaliznychnyi transport Ukrainy – Railway Transport of Ukraine, 2007, no. 3, pp. 53-54.

Bolshakov Yu.L., Gershman I.S., Sychenko V.G.. Perspektivnyye napravleniya sozdaniya sovremennykh uglerodnykh materialov dlya vstavok tokopriyemnikov elektrotransporta [Perspective directions of development of modern carbon materials for electric surface inserts]. Elektryfikatsiia transportu – Electrification of Transport, 2013, no. 5, pp. 19-23.

Gershman I.S., Bolshakov Yu.L., Sychenko V.G. Sovmestimost razlichnykh tokosemnykh materialov na odnom uchastke kontaktnogo provoda [The compatibility of different current collector materials in one area of a contact wire line]. Zaliznychnyi transport Ukrainy – Railway Transport of Ukraine, 2008, no. 5, pp. 52-56.

Gershman I.S. Tokosemnyye uglerodno-mednyye materialy [Current collecting carbon-copper materials]. Vestnik Vserossiyskogo nauchno-issledovatelskogo instituta zheleznodorozhnogo transporta [Bulletin of the All-Russian Research Institute of Railway Transport], 2002, no. 5, pp. 15-20.

Gershman I.S., Buchnev L.M. Tokosemnyye uglerodnyye materialy novogo pokoleniya [Collector carbon materials of new generation]. Vestnik Vserossiyskogo nauchno-issledovatelskogo instituta zheleznodorozhnogo transporta [Bulletin of the All-Russian Research Institute of Railway Transport], 2003, no. 6, pp. 21-27.

Gershman I.S., Mironos N.V. Trebovaniya k kontaktnym provodam dlya vysokoskorostnogo zheleznodorozhnogo transporta [Requirements for contact wires for high-speed rail]. Vestnik Vserossiyskogo nauchno-issledovatelskogo instituta zheleznodorozhnogo transporta [Bulletin of the All-Russian Research Institute of Railway Transport], 2011, no. 3, pp. 13-17.

GOST 14692-78. Vstavki ugolnyye kontaktnyye dlya tokopriyemnikov elektropodvizhnogo sostava. TU 1916-020-27208846-99 (Rossiya) [State Standard 14692-78. Coal contact inserts for current collectors of electric rolling stock. TU 1916-020-27208846-99 (Russia)]. Moscow, Standartinform Publ., 1999. 40 p.

GOST 14692-78. Vstavki ugolnyye kontaktnyye dlya tokopriyemnikov elektropodvizhnogo sostava TU 32.22117843.003-2000 (Ukraina). [State Standard 14692-78. Coal contact inserts for current collectors of electric rolling stock TU 32.22117843.003-2000 (Ukraine)]. Kiyev, Standartinform Publ., 2000. 42 p.

Kolesov S.N., Kolesov I.S. Materialy i vzaimodeystviye kontaktnoy podveski i tokopriyemnika. [The materials and the interaction between catenary and pantograph]. DNURT Publ., 2006. 284 p.

Kolesov S.N. Klimenko N.V. Uluchsheniye dinamicheskikh kharakteristik tokopriyemnikov [Improvement of dynamic characteristics of the current collectors]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2005, issue 8, pp. 45-47.

Kuptsov Yu.Ye. Besedy o tokosyeme i yego nadezhnosti, ekonomichnosti i o putyakh sovershenstvovaniya [Discussions about the current collection and its reliability, efficiency and ways of improvements]. Moscow, Modern Publ., 2001. 256 p.

Li V.N., Khimukhin S.N. Nerazrushayushchiy kontrol elementov kontaktnoy seti i tokopriyemnikov elektropodvizhnogo sostava elektrifitsirovannykh zheleznykh dorog [Non-destructive testing of elements of the contact network and the electric rolling stock pantographs of electrified Railways]. Khabarovsk, Dalnevostochnyy gosudarstvennyy universitet putey soobshcheniya Publ., 2007. 266 p.

Li V.N., Matytsyn Ye.V. Opredeleniye kachestva izgotovleniya ugolnykh vstavok tokopriyemnikov [The quality determination of manufacturing of coal inserts in current collectors]. Elektryfikatsiia transportu – Electrification of Transport, 2012, no. 3, pp. 71-73.

Bolshakov Yu.L., Gershman I.S., Sychenko V.G., Zhukovin S.M. Osnovnyye napravleniya sozdaniya novykh kompozitsionnykh materialov dlya vstavok tokopriyemnikov elektrotransporta [The basic directions of creation of new composite materials for current collector inserts in the electric vehicle]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2006, issue 13, pp. 14-20.

Zhukovin S.M., Vlasov Ye.I. Tokosemnyy element tokopriyemnika elektricheskogo transportnogo sredstva [The slip element of current collecting in the electric vehicle]. Patent Rus. no. 2229395, 2004.

Samodurova M.N., Barkov L.A. Tokosemnyy element elektricheskogo transportnogo sredstva [Current collecting element of the electric vehicle]. Patent Rus. no. 2002135796/282002135795/26. 2004.

Polishchuk V.S., Bukovskiy V.I., Filatov A.V. Kompozitsionnyye nakladki pantografov elektropodvizhnogo sostava [Composite strips of pantographs in the electric rolling stock]. Zaliznychnyi transport Ukrainy – Railway Ttransport of Ukraine, 2001, no. 3, pp.14-17.

Gershman I.S., Mironos N.V., Melnik M.A., Gershman Ye.I. Tokosemnyye vstavki dlya tokopriyemnikov zheleznodorozhnogo transporta [Collector inserts for collectors of railway transport]. Vestnik Vserossiyskogo nauchno-issledovatelskogo instituta zheleznodorozhnogo transporta [Bulletin of the All-Russian Research Institute of Railway Transport], 2012, no. 4, pp. 3-10.

Kholm R. Elektricheskiye kontakty [Electric contacts]. Moscow, Izdatelstvo inostrannoy literatury Publ., 1961. 464 p.

Yandovich V.N., Sychenko V.G., Antonov A.V. Sravnitelnyy analiz kontaktnykh podvesok v stranakh Yevrosoyuza i Ukrainy: organizatsiya nadezhnogo tokosema [A comparative analysis of overhead catenaries in the European Union and Ukraine: the organization of reliable current-collecting]. Elektryfikatsiia transportu – Electrification of Transport, 2014, no. 7, pp. 67-77.

Auditeau G. Carbon of high destiny for current collection. Revue Generale des Chemins de Fer, 2010, no. 200, pp. 9-19.

Auditeau G. Wearout current collection contact. Elektrische Bahnen, 2013, no. 3, pp. 186-194.

Lee J.H., Park T.W. Development and Verification of a Dynamic Analysis Model for the Current-Collection Performance of High-Speed Trains Using the Absolute Nodal Coordinate Formulation. Transactions of the KSME, 2012, no. 36 (3), pp. 339-346. doi: 10.3795/KSME-A.2012.36.3.339.

Kubo S., Tsuchiya H., Ikeuchi J. Wear Properties of Metal/Carbon Composite Pantograph Sliders for Conventional Electric Vehicles. Quorterly Report of RTRI, 1997, vol. 38, no. 1, pp. 25-30.