Дослідження впливу хрестовини стрілочного переводу на вертикальні та горизонтальні деформації пневматичної ресори швидкісного рухомого складу

A. Ya. Kuzyshyn; V. V. Kovalchuk; N. V. Kostiv

doi:10.15802/stp2024/312930

Authors

A. Ya. Kuzyshyn Lviv Polytechnic National University, Ukraine https://orcid.org/0000-0002-3012-5395
V. V. Kovalchuk Lviv Polytechnic National University, Ukraine https://orcid.org/0000-0003-4350-1756
N. V. Kostiv Lviv Polytechnic National University, Ukraine https://orcid.org/0009-0005-5832-9786

DOI:

https://doi.org/10.15802/stp2024/312930

Keywords:

reverse motion, forward motion, cross member, turnout, deformation, pneumatic spring

Abstract

Purpose. The aim of the study is to determine the values of vertical and horizontal deformations of the pneumatic spring of high-speed rolling stock during the movement of the test setup along the cross of the switch in the forward and reverse directions. Methodology. To determine the deformations of the pneumatic spring, a special test bench consisting of a pneumatic spring and specialized measuring equipment was developed. The deformations of the air spring in the vertical and horizontal planes were measured using high-frequency potentiometric linear displacement sensors, the signals from which were read using a programmed analog-to-digital converter. To obtain reliable data on the deformations of the air spring, six passes of the test bench were made in the forward and reverse directions of the cross member. Findings. A methodology for dynamic testing of a pneumatic spring of high-speed rolling stock under conditions of movement along the crosshead of a turnout in the forward and reverse directions was developed. The records of vertical and horizontal deformations of the pneumatic spring of high-speed rolling stock under the conditions of movement along the crossover of a switch were obtained. It is established that the deformations of the pneumatic spring in the vertical plane are higher than those in the horizontal plane. The average value of the vertical deformations of the pneumatic spring in the forward direction is 3.15 mm, which is 9.98 % higher than the average value in the opposite direction of the test unit's movement along the cross-section of the switch. In the horizontal direction, this difference in deformation of the air spring is 25.1 %. Originality. For the first time, the vertical and horizontal deformations of the pneumatic spring of high-speed rolling stock under the conditions of movement along the crossbar of a switch were determined, taking into account the direction of movement, forward and reverse. Practical value. Determining the values of deformations of the pneumatic spring will allow to study its dynamic characteristics in different operating conditions of rolling stock, and at the design stage to select the appropriate characteristics of the pneumatic spring suspension system and determine the dynamic and safety indicators of rolling stock.

References

Kuzyshyn, A. Ya., & Kovalchuk, V. V. (2024). Experimental Study of the Regularities of Deformation of the Rubber Cord Shell of a Pneumatic Spring of High-Speed Rolling Stock. Science and Transport Progress, 2(106), 53-63. DOI: https://doi.org/10.15802/stp2024/306143 (in Ukrainian)

Kuzyshyn, A. Y., Kostritsia, S. A., Sobolevska, Yu. H., & Batih, A. V. (2021). World Experience in Creating Mathematical Models of Air Springs: Advantages and Disadvantages. Science and Transport Progress, 4(94), 25-42. DOI: https://doi.org/10.15802/stp2021/245974 (in Ukrainian)

Orlovskyi, A. M,. Kalenyk, K. L., & Kovalchuk, V. V. (2012). Investigation of longitudinal profile of rigid frogs on reinforced concrete sleepers. Bulletin of the Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, 41, 130-135. (in Ukrainian)

Alonso, A., Giménez, J. G., Nieto, J., & Vinolas, J. (2010). Air suspension characterisation and effectiveness of a variable area orifice. Vehicle System Dynamics, 48(sup1), 271-286. DOI:https://doi.org/10.1080/00423111003731258 (in English)

Berg, M. (1997). A model for rubber springs in the dynamic analysis of rail vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 211(2), 95-108. DOI: https://doi.org/10.1243/0954409971530941 (in English)

Berg, M. (1999). A Three–Dimensional Airspring Model with Friction and Orifice Damping. Vehicle System Dynamics, 33(sup1), 528-539. DOI: https://doi.org/10.1080/00423114.1999.12063109 (in English)

Bešter, T., Oman, S., & Nagode, M. (2018). Determining influential factors for an air spring fatigue life. Fatigue and Fracture of Engineering Materials and Structures, 42(1), 284-294. DOI: https://doi.org/10.1111/ffe.12904 (in English)

Docquier, N., Fisette, P., & Jeanmart, H. (2008). Model-based evaluation of railway pneumatic suspensions. Vehicle System Dynamics, 46(sup1), 481-493. DOI: https://doi.org/10.1080/00423110801993110

(in English)

Docquier, N., Fisette, P., & Jeanmart, H. (2007). Multiphysic modelling of railway vehicles equipped with pneumatic suspensions. Vehicle System Dynamics, 45(6), 505-524. DOI: https://doi.org/10.1080/00423110601050848 (in English)

Facchinetti, A., Mazzola, L., Alfi, S., & Bruni, S. (2010). Mathematical modelling of the secondary airspring suspension in railway vehicles and its effect on safety and ride comfort. Vehicle System Dynamics, 48(sup1), 429-449. DOI: https://doi.org/10.1080/00423114.2010.486036 (in English)

Kovalchuk, V., Bolzhelarskyi, Y., Parneta, B., Pentsak, A., Petrenko, O., & Mudryy, I. (2017). Evaluation of the stressed-strained state of crossings of the 1/11 type turnouts by the finite element method. Eastern-European Journal of Enterprise Technologies, 4(7(88)), 10-16. DOI: https://doi.org/10.15587/1729-4061.2017.107024 (in English)

Kuzyshyn, A., Batig, A., Kostritsa, S., Sobolevska, J., Kovalchuk, V., Dovhanyuk, S., & Voznyak, O. (2018). Research of safety indicators of diesel train movement with two-stage spring suspension. MATEC Web of Conferences, 234, 1-6. DOI: https://doi.org/10.1051/matecconf/201823405003 (in English)

Li, F. X., Yang, W. M., & Ding, Y. M. (2006). Simulation of Static Test of Air-Spring. Advanced Materials Research, 11-12, 713-716. DOI: https://doi.org/10.4028/www.scientific.net/amr.11-12.713 (in English)

Li, X., He, Y., Liu, W., & Wei, Y. (2015). Research on the vertical stiffness of a rolling lobe air spring. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(4), 1172-1183. DOI: https://doi.org/10.1177/0954409715585370 (in English)

Li, X., & Li, T. (2013). Research on vertical stiffness of belted air springs. Vehicle System Dynamics, 51(11), 1655-1673. DOI: https://doi.org/10.1080/00423114.2013.819984 (in English)

Mazzola, L., & Berg, M. (2012). Secondary suspension of railway vehicles - air spring modelling: Performance and critical issues. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(3), 225-241. DOI: https://doi.org/10.1177/0954409712470641 (in English)

Nakajima, T., Shimokawa, Y., Mizuno, M., & Sugiyama, H. (2014). Air Suspension System Model Coupled With Leveling and Differential Pressure Valves for Railroad Vehicle Dynamics Simulation. Journal of Computational and Nonlinear Dynamics, 9(3), 1-9. DOI: https://doi.org/10.1115/1.4026275 (in English)

Sayyaadi, H., & Shokouhi, N. (2010). Effects of air reservoir volume and connecting pipes length and diameter on the air spring behavior in rail vehicles. Iranian Journal of Science and Technology Transaction B: Engineering, 34(B5), 499-508. (in English)

Sun, J. (2011). Calculation of vertical stiffness of air spring with FEM. 4th ANSA & META International Conference, 1-4. (in English)

Sun, L., Li, Z., Shen, X., & Zhu, J. (2013). Simulation and test study on dynamic characteristic of air spring with auxiliary chamber. Applied Mechanics and Materials, 341-342, 391-394. DOI: https://doi.org/10.4028/www.scientific.net/AMM.341-342.391 (in English)

Tanaka, T., & Sugiyama, H. (2019). Prediction of railway wheel load unbalance induced by air suspension leveling valves using quasi-steady curve negotiation analysis procedure. Proceedings of the Institution of Me-chanical Engineers, Part K: Journal of Multi-Body Dynamics, 234(1), 19-37. https://doi.org/10.1177/1464419319867179 (in English)

Xu, L. (2020). Mathematical Modeling and Characteristic Analysis of the Vertical Stiffness for Railway Vehicle Air Spring System. Mathematical Problems in Engineering, 2020, 1-12. DOI: https://doi.org/10.1155/2020/2036563 (in English)

Zhu, H., Yang, J., Zhang, Y., & Feng, X. (2017). A novel air spring dynamic model with pneumatic thermodynamics, effective friction and viscoelastic damping. Journal of Sound and Vibration, 408, 87-104. DOI: https://doi.org/10.1016/j.jsv.2017.07.015 (in English)