Operation study of different structural options of flexible flows for car repair using simulation modeling
DOI:
https://doi.org/10.15802/stp2014/25920Keywords:
car repair, flexible flow, simulation modeling, analysis of car repair structures, design of car repair enterprisesAbstract
Purpose. The article is aimed to improve the methods of car repair organization using the search of rational structures of flexible flows. Methodology. For operation analyses of the car repair flows the simulation modeling was used. The initial data for random value generation of cars repair duration are the statistical data. They were collected at the existing car repair enterprises. Findings. Obtained results show that at the same amount of modules the flexible repair flow is more efficient. Flexible flow increases the working capacity, improves the removal of cars from one module and reduces car detention time in repair. Originality. There were identified the mechanisms, which allow establishing links between the different structural variants of flexible flow and their operational performance. Concrete data that give a fresh look to the organization of car repair production were obtained. Practical value. These results can be used in designing the new perspective enterprises for car repair and also under reconstruction or expansion of existing enterprises in order to transfer them to the flexible flow. It is recommended to incorporate the obtained results and try to put them into production during designing and construction of new car enterprises.
References
Bolotin M.M., Vorotnikov V.G., Vtorova T.V., Kozlovskiy I.V. Avtomatizirovannye sistemy obrabotki informatsii i gibkiye tekhnologii na remontnykh predpriyatiyakh [Automated data processing systems and flexible technologies at the repair bases]. Avtomatizatsiya i sovremennyye tekhnologii − Automation and high technologies, 1992, no. 8, pp. 21-23.
Barash Yu.S., Senko V.I., Lyulko A.F. Potochnyye linii gibkogo manevrirovaniya [Production lines of flexible maneuvering]. Zheleznodorozhnyy transport – Railway Transport, 1987, no. 2, pp. 64-65.
Bolotin M.M., Vorotnikov V.G. Modeliruyushchiye algoritmy i avtomatizatsiya raschetov [Modeling algorithms and automation of calculations]. Mir transporta − Transport World, 2008, no. 3, pp. 100-109.
Bolotin M.M., Vorotnikov V.G. Novaya tekhnologiya remonta vagonov [The new technology of car repair]. Zheleznodorozhnyy transport – Railway Transport, 1991, no. 9, pp. 29-33.
Ustich P.A. Vagonnoye khozyaystvo [Car facilities]. Мoscow, Marshrut Publ., 2003. 560 p.
Vasetskiy V.V., Oleynikova S.A., Pitolin V.M. Optimizatsiya upravleniya potokami zayavok na remont v usloviyakh mnogostadiynogo vagonoremontnogo proizvodstva [Control optimization of arrivals for repair in the conditions of the multistage car-repair production]. Informatsionnyye tekhnologii modelirovaniya i upravleniya − Information Technology of Modeling and Control, 2006, no. 7 (32), pp. 882-890.
Vorotnikov V.G., Martynov R. Modulnyy konveyer [Modular conveyor]. Gudok, 2010, July, 1st.
Vorotnikov V.G., Denisenko A.A. Osnovnyye printsipy modelirovaniya protsessov funktsionirovaniya gibkikh proizvodstvennykh sistem vagonnykh depo [The main principles of modeling the functioning of flexible manufacturing systems in car-repair sheds]. Materialy 8 nauchno-prakticheskoy konferentsii «Bezopasnost dvizheniya poyezdov» [Proc. of the 8th Int. Sci. and Practical Conf. «Trains movement safety»]. Moscow, pp. VI-3.
Vorotnikov V.G. Perspektivnyye napravleniya povysheniya proizvodstvennogo potentsiala vagonnykh depo [Perspective lines of production potential increasing of car-repair sheds]. Materialy 8 nauchno-prakticheskoy konferentsii «Bezopasnost dvizheniya poyezdov» [Proc. of the 8th Int. Sci. and Practical Conf. «Trains movement safety»]. Moscow, pp. VI-3−VI-4.
Gubenko V.K., Litvinenko V.P., Psaras G.G. Osnovnye opredeleniya i pokazateli gibkogo remontnogo protsessa tsistern [Basic definitions and indicators of flexible repair process in tanks]. Zhdanov, no. 2229-Uk86., 1986. 19 p.
Koturanov V.N., Bolotin M.M., Muravyev S.N. Puti usileniya vagonoremontnoy bazy [Strengthening ways of car repair base]. Zheleznodorozhnyy transport −Railway Transport, 1994, no. 11, pp. 54-56.
Mironov A.Yu. Sokrashchat prostoi vagonov v remonte [To reduce cars detention in repair]. Zheleznodorozhnyy transport −Railway Transport, 2007, no. 8, pp. 22-23.
Myamlin V.V. Analiz osnovnykh parametrov asinkhronnogo gibkogo potoka remonta vagonov i metody ikh rascheta [Main parameters analysis of asynchronous flexible flow of cars repair and the methods of their calculation]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2009, issue 26, pp. 28-33.
Myamlin V.V. Gibkiye potoki dlya remonta vagonov i osobennosti imitatsionnogo modelirovaniya ikh raboty [Flexible flows for cars repair and simulation modeling features of their work]. Transport Rossiyskoy Federatsii − Transport of Russian Federation, 2013, no. 3 (46), pp. 57-60.
Myamlin V.V. Komponovochnyye resheniya organizatsionno-tekhnologicheskikh struktur perspektivnykh vagonoremontnykh depo s asinkhronnymi gibkimi potokami remonta vagonov [Layout arrangements of organizational and technological structures of perspective car-repair sheds with asynchronous flexible flows of cars repair]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue 31, pp. 55-62.
Myamlin V.V. Struktury gibkikh vagonoremontnykh uchastkov i ikh vliyaniye na kolichestvo vozmozhnykh variantov puti peremeshcheniya vagonov mezhdu pozitsiyami potoka [Structures of flexible cars-repair sections and their effect on the number of possible variants of the movement cars way between the positions of a flow]. Vestnik Rostovskogo gosudarstvennogo universiteta putey soobshcheniya [Bulletin of Rostov State University of Сommunication Lines], 2013, issue, no. 4 (52), pp. 77-86.
Vorotnikov V.G. Obrazovaniye parametrov i osnashcheniye gibkikh potochnykh liniy po remontu vagonov [Parameters formation and equipment of flexible production lines at cars repair]. Avtomatizatsiya i sovremennyye tekhnologii − Automation and high technologies, 1993, no. 3, pp. 3-5.
Senko V.I., Chernin I.L. Novaya tekhnologiya remonta gruzovykh vagonov [New technology of freight car repair]. Tezisy dokladov II Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Aktualnyye problemy razvitiya zheleznodorozhnogo transporta» [Proc. of the II Int. Sci. and Practical Conf. «Urgent problems of railway transport development»], Moscow, 1996, pp. 113.
Senko V.I. Razvitiyu depovskoy bazy – nauchnyy podkhod [To the development of a depot base – a scientific approach]. Zheleznodorozhnyy transport −Railway Transport, 1990, no. 6, pp. 41-42.
Skiba I.F., Yezhikov V.A. Kompleksno-mekhanizirovannyye potochnyye linii v vagonoremontnom proizvodstve [Integrated and mechanized flow lines in car repair production]. Moscow, Transport Publ., 1982. 136 p.
Starykh S.A. Povysheniye effektivnosti remonta gruzovykh vagonov [Improvement of freight cars repair effectiveness]. Zheleznodorozhnyy transport −Railway Transport, 2007, no. 8, pp. 24-27.
Dudarev A.Ye., Svinukhov V.P., Anofriyev V.G., Bezovskaya L.P. Struktura i parametry gibkoy organizatsii vagonoremontnogo protsessa [Structure and parameters of the flexible organization of car repair process]. Voprosy uluchsheniya khodovykh chastey i obsluzhivaniya vagonov [Issues of improvement the running gears and car service]. Dnipropetrovsk, 1987, issue 255/10, pp. 65-69.
Shamahin V.O., Arefiev M.F., Pasko V.N., Mykhailiukov V.L. Tekhnolohiia remontu rukhomoho skladu. Ch. 1 [Repair technology of rolling stock. Part 1]. Kyiv, Delta Publ., 2008. 479 p.
Tukhareli O.G., Morchiladze R.G. Remontu vagonov – industrialnuyu bazu [Industrial base is for cars repair]. Zheleznodorozhnyy transport −Railway Transport, 1985, no. 1, pp. 42-44.
Myamlin V.V. Asynchronous flexible stream of wagon repair and modeling of its functioning process as aggregated system. Proc. of the 6-th Int. Sci. Conf. «Transbaltica 2009». Vilnius, 2009, pp. 173-178.
Myamlin V. Searching of the ways of definition of the rational configuration of divisions of the car-repair facilities on the basis of the flexible stream on the design stage. TEKA. Commission of Motorization and Energetics in Agriculture. An international quarterly journal on motorization, vehicle operation, energy efficiency and mechanical engineering, 2013, vol. 13, no. 4, pp. 167-173.
Barich David J., Barich D.M., Donahue T. P. Railcar maintenance process. Assignee General Electric Company. Patent US, no. 09/725656.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
