Kinematics and dynamics models of cylindrical roller bearing of railway transport
DOI:
https://doi.org/10.15802/stp2014/25874Keywords:
bearing cages, rollers, bearings, radial loading area, kinematics, dynamics, interaction forcesAbstract
Purpose. Lack of kinematics models and imperfection of the known dynamics models of the roller bearings of railway rolling stock axle-boxes do not allow designing the optimal structure of bearing cages, providing the required service life and reliability of bearing units of wheel sets for cars and locomotives. The studies of kinematics and dynamics of roller bearings of axle boxes for cars and locomotives and modeling of their parts interaction to create the analytical method of bearing cages calculation are necessary. Methodology. This purpose has been achieved due to the modeling of kinematics of the ideal (without gaps) and real (taking account the gaps, manufacturing and installation errors) bearings, substantiation of the transfer mechanism of motion from the rollers to bearing cage, modeling the dynamics of rolling, research of interaction forces of the rollers with bearing cage. Findings. It is established that the kinematics of ideal bearing is determined by the contact deformations of the rollers and rings, when the kinematics of real bearing depends mainly on the side gaps in the windows of the bearing cage. On the basis of studies of the real bearing kinematics the dynamics models of the rollers and bearing cage interaction were constructed. The conducted studies of kinematics and dynamics of rolling bearings have changed our view of them as of the planetary mechanism, explained the reason of bearing cage loading, and confirmed the possibility of destruction during operation. Originality. It was first proposed a mechanism for motion transfer from the rollers to the bearing cage of roller bearings, consisting in that the side gap in the bearing cage window is reduced gradually multiple of the number of rollers of radial loading area according to the bearing cage motion. The models of roller bearing dynamics, which allow calculating the interaction forces of parts for all modes of operation, were improved. Practical value. Use of the offered models of kinematics and dynamics of the roller bearings will develop analytical calculation method of the bearing cage for the choice of its optimal design according to criterion of maximum service life and reliability of the bearing unit of wheel sets of the railway rolling stock.
References
Averin, N.A., Rusanov O.A., Ivanov S.G. Issledovaniya nagruzhennosti poliamidnykh separatorov dlya buksovykh podshipnikov metodom konechnykh elementov [Studies of the loading of polyamide bearing cages for axle box bearing under-bearings using the finite elements method]. Vestnik VNIIZhTa – VNIIZhT Bulletin, 2007, no. 3, pp. 24-29.
Gaydamaka A.V. Rolikopodshipniki buks vagonov i lokomotivov: modelirovaniye i usovershenstvovaniye [Roller bearings of axle boxes of cars and locomotives]. Kharkiv, Kursor Publ., 2011. 320 p.
Gaydamaka A.V. O prichinakh poyavleniya sil mezhdu telami kacheniya i separatorom v podshipnikakh [On the appearance causes of forces between the rolling bodies and the bearing cages]. Zbirnyk naukovykh prats UkrDAZT [Proc. of Ukrainian State Academy of Railway Transport], 2003, issue 54, pp. 111-116.
Losev A.V. Silovoye vzaimodeystviye elementov tsilindricheskogo rolikovogo podshipnika [Force interaction of the elements of the straight roller bearing]. Trudy VNIIZhTa – Proc. of VNIIZhT, 1975, issue 540, pp. 63-67.
Mykhailichenko P.Ye. Kharakter ta velychyna znosu detalei presovoho zyednannia buksovoho vuzla vahoniv [Character and wear rate of the press joint parts of the axle box of cars]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2005, issue 6, pp. 92-101.
Nosov V.B. Podshipnikovyye uzly sovremennykh mashin i priborov [Bearing boxes of the modern machines and devices]. Moscow, Mashinostroyeniye Publ., 1997. 640 p.
Simson E.A., Ovcharenko V.V., Shevchuk Yu.A. Raschet napryazhenno-deformirovannogo sostoyaniya separatora podshipnika kacheniya [Calculation of the stress-strain state of bearing cages]. Vestnik Natsionalnogo tekhnicheskogo universiteta «Kharkovskiy Politekhnicheskiy Institut» [Bulletin of National Technical University «Kharkiv Polytechnical University»], 2010, issue 37, pp. 142-145.
Prikhodko V.I., Shkabrov O.A., Ignatov S.G. Usovershenstvovaniye sistemy kontrolya nagreva buks passazhirskogo vagona [Improvement of heating system control of the axle boxes of the passenger car]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2005, issue 7, pp. 57-60.
Fujiwara H., Kobayashi T. Dynamic Analysis of Needle Roller Bearings in Connecting Rod Big-End Applications. NTN Technical Review, 2001, no. 69, pp. 89-96.
Gupta P.K. Advanced Dynamics of Rolling Elements. New York, Springer-Verlag Publ., 1984. 340 p.
Harris T. Rolling bearing analysis. New York, Wiley Publ., 2006. 760 p.
Kakuta K., Kohno T., Ota H. Generating Mechanism of Forces Acting on Retainer of Ball Bearings Supporting Unbalanced Rotating Shaft. Transactions of the Japan Society of Mechanical Engineers, 1996, no. 62-600, pp. 3210-3215.
Sakaguchi T., Harada K. Dynamic Analysis of Cage Stress in Tapered Roller Bearings. Proc. ASIATRI, 2006, pp. 649-650.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
