Світовий досвід створення математичних моделей пневматичної ресори: переваги та недоліки

A. Y Kuzyshyn; S. A Kostritsia; Yu. H Sobolevska; A. V.  Batih

doi:10.15802/stp2021/245974

Authors

A. Y. Kuzyshyn Dnipro National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0002-3012-5395
S. A. Kostritsia Dnipro National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0002-7922-0975
Yu. H. Sobolevska Dnipro National University of Railway Transport named after Academician V. Lazaryan, Lviv Branch, Ukraine https://orcid.org/0000-0002-8087-2014
A. V. Batih Lviv Research Institute of Forensic Sciences, Ukraine https://orcid.org/0000-0003-1205-6004

DOI:

https://doi.org/10.15802/stp2021/245974

Keywords:

air spring, rolling stock, mathematical model, rigidity, damping, thermodynamics, pressure, temperature

Abstract

Purpose. Taking into account the production and commissioning of modern high-speed rolling stock, the authors are aimed to analyze the currently created mathematical models describing the dynamic behavior of the air spring, systematize them and consider the advantages and disadvantages of each model type. Methodology. For the analysis, a comparative chronological method was used, which makes it possible to trace the development of several points of view, concepts, theories. In accordance with the adopted decision equations, the existing models of air springs were divided into three groups: mechanical, thermodynamic and finite-elements. When analyzing mathematical models, the influence of a number of parameters on the dynamic behavior of the air spring, such as disturbing force frequency, heat transfer, nonlinear characteristics of materials, the shape of the membrane, etc., was considered. Findings. A feature of mechanical models is the determination of input parameters based on the analysis of experimental results, requires access to complex measuring equipment and must be performed for each new model of an air spring separately. Unlike mechanical models, which allow taking into account the damping effect of an air spring in the horizontal and vertical direction, thermodynamic models are mainly focused on studying the dynamic behavior of an air spring in the vertical direction. The use of the finite element method makes it possible to most accurately reproduce the dynamic behavior of an air spring, however, it requires significant expenditures of time and effort to create a finite element model and perform calculations. Originality. Mathematical models of the dynamic behavior of an air spring are systematized, and the importance of their study in conjunction with a spatial mathematical model of high-speed rolling stock is emphasized. Practical value. The analysis of the mathematical models of the dynamic behavior of the air spring shows the ways of their further improvement, indicates the possibility of their use in the spatial mathematical model of the rolling stock in accordance with the tasks set. It will allow, even at the design stage of high-speed rolling stock, to evaluate its dynamic characteristic and traffic safety indicators when interacting with a railway track.

References

Miram, A. O., & Pavlenko, V. A. (2011). Tekhnicheskaya termodinamika. Teplomassoobmen: uchebnoe izdanie. Moscow: Izdatelstvo ASV. (in Russian)

Reidemeister, O. H., & Kivisheva, A. V. (2016). Dependence of air spring parameters on throttle resistance. Science and Transport Progres, 2(62), 157-164. DOI: https://doi.org/10.15802/stp2016/67339 (in Russian)

Reidemeister, O. H., & Laguza, A. V. (2018). Determination of characteristics of throttling device for pneumatic spring. Science and Transport Progress, 1(73), 66-76. DOI: https://doi.org/10.15802/stp2018/123394 (in Russian)

Stoyanov, N. I., Smirnov, S. S., & Smirnova, A. V. (2014). Teoreticheskie osnovy teplotekhniki (tekhnicheskaya termo-dinamika i teplomassoobmen): uchebnoe posobie. Stavropol: North-Caucasus federal university. (in Russian)

Strateghija AT «Ukrzaliznycja» na 2019-2023 roky. (2019). Kabinet Ministriv Ukrajiny vid 12 chervnja 2019 roku No 591-r. (in Ukrainian)

Aizpun, M., Vinolas, J., & Alonso, A. (2013). Using the stationary tests of the acceptance process of a rail vehicle to identify the vehicle model parameters. Journal of Rail and Rapid Transit, 228(4), 408-421. DOI: https://doi.org/10.1177/0954409713478592 (in English)

Alonso, A., Giménez, J. G., Nieto, J., & Vinolas, J. (2010). Air suspension characterisation and effectiveness of a variable area orifice. Vehicle System Dynamics, 48(sup1), 271-286. DOI: https://doi.org/10.1080/00423111003731258 (in English)

Berg, М. (1997). An air spring model for dynamic analysis of rail vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transi, 211(2), 95-108. DOI: https://doi.org/10.1243/0954409971530941 (in English)

Berg, M. (1999). A Three–Dimensional Airspring Model with Friction and Orifice Damping. Vehicle System Dy-namics, 33(sup1), 528-539. DOI: https://doi.org/10.1080/00423114.1999.12063109 (in English)

Berg, M. (1994). Modelling of springs and dampers for dynamic analysis of rail vehicles-a pilot study. Railway Technology, Department of Vehicle Engineering, Royal Institute of Technology. (in English)

Berry, D., & Yang, H. (1996). Formulation and experimental verification of a pneumatic finite element. Formulation and experimental verification of a pneumatic finite element, 39(7), 1097-1114. DOI: https://doi.org/10.1002/(sici)1097-0207(19960415)39:7<1097::aid-nme880>3.0.co;2-9 (in English)

Bešter, T., Oman, S., & Nagode, M. (2018). Determining influential factors for an air spring fatigue life. Fatigue & Fracture of Engineering Materials & Structures, 42(1), 284-294. DOI: https://doi.org/10.1111/ffe.12904 (in English)

Bruni, S., Vinolas, J., Berg, M., Polach, O., & Stichel, S. (2011). Modelling of suspension components in a rail vehicle dynamics context. Vehicle System Dynamics, 49(7), 1021-1072. DOI: https://doi.org/10.1080/00423114.2011.586430 (in English)

Chang, F., & Lu, Z.-H. (2008). Dynamic model of an air spring and integration into a vehicle dynamics model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(10), 1813-1825. DOI: https://doi.org/10.1243/09544070JAUTO867 (in English)

Chen, J.-J., Yin, Z.-H., Rakheja, S., He, J.-H., & Guo, K.-H. (2017). Theoretical modelling and experimental analysis of the vertical stiffness of a convoluted air spring including the effect of the stiffness of the bel-lows. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineer-ing, 232(4), 547-561. DOI: https://doi.org/10.1177/0954407017704589 (in English)

Coquis, D. P. (2004). Optimización de suspensiones neumáticas de vehículos ferroviarios (Doctoral dissertation). Universidad Politécnica de Madrid. Retrieved from https://oa.upm.es/7538/ (in English)

De Melo, F., Pereira, A., & Morais, A. (2018). The Simulation of an Automotive Air Spring Suspension Using a Pseudo-Dynamic Procedure. Applied Sciences, 8(7), 1049-1069. DOI: https://doi.org/10.3390/app8071049 (in English)

Dixon, G., & Pearson, J. (1967). Automatically controlled air spring suspension system for vibration testing. In National Aeronautics and Space Administration (NASA). Retrieved from https://ntrs.nasa.gov/api/citations/19670013958/downloads/19670013958.pdf (in English)

Docquier, N., Fisette, P., & Jeanmart, H. Influence of heat transfer on railway pneumatic suspension dynamics. Retrieved from https://dial.uclouvain.be/pr/boreal/object/boreal%3A81161/datastream/PDF_01/ view (in English)

Docquier, N., Fisette, P., & Jeanmart, H. (2008). Model-based evaluation of railway pneumatic suspensions. Vehicle System Dynamics, 46(sup1), 481-493. DOI: https://doi.org/10.1080/00423110801993110 (in English)

Docquier, N., Fisette, P., & Jeanmart, H. (2007). Multiphysic modelling of railway vehicles equipped with pneumatic suspensions. Vehicle System Dynamics, 45(6), 505-524. DOI: https://doi.org/10.1080/00423110601050848 (in English)

Docquier, N. (2010). Multiphysics modelling of multibody systems application to railway pneumatic suspensions (Doctoral dissertation). Université catholique de Louvain. Retrieved from https://dial.uclouvain.be/pr/boreal/object/boreal:33474/datastream/PDF_01/view (in English)

Du, J., Shi, S., Luo, S., Cheng, T., Peng, X., & Feng, P. (2013). Studies on modeling a single-bellows air spring and simulating its inherent characteristics. Journal of Shenzhen University Science and Engineering, 30(2), 167-172. DOI: https://doi.org/10.3724/sp.j.1249.2013.02167 (in English)

EN 14363:2005. Testing for the acceptance of running characteristics of railway vehicles – Testing of running behaviour and stationary tests. Retrieved from https://standards.iteh.ai/catalog/standards/cen/28104202-ab20-4285-84c2-b17c37bdd183/en-14363-2005 (in English)

Facchinetti, A., Mazzola, L., Alfi, S., & Bruni, S. (2010). Mathematical modelling of the secondary airspring suspension in railway vehicles and its effect on safety and ride comfort. Vehicle System Dynamics, 48(sup1), 429-449. DOI: https://doi.org/10.1080/00423114.2010.486036 (in English)

Gao, H. X., Chi, M. R., Zhu, M. H., & Wu, P. B. (2013). Study on Different Connection Types of Air Spring. Applied Mechanics and Materials, 423-426, 2026-2034. DOI: https://doi.org/10.4028/www.scientific.net/AMM.423-426.2026 (in English)

Gil-Negrete, N., Nieto, F. J., Pradera-Mallabiabarrena, A., & Gonzalez-Prada, J. (2018). On the dynamic stiffness of air springs at medium-high frequencies. In 28th International Conference on Noise and Vibration En-gineering, ISMA 2018 and 7th International Conference on Uncertainty in Structural Dynamics (pp. 3567-3579). (in English)

Haider, A., & Ameen, N. (2015). Experimental and Theoretical Study of Air Suspension System Control for Passenger Vehicles by Using PID and Fuzzy Controllers (PhD dissertation). (in English)

Haupt, P., & Sedlan, K. (2001). Viscoplasticity of elastomeric materials: experimental facts and constitutive modelling. Archive of Applied Mechanics (Ingenieur Archiv), 71(2-3), 89-109. DOI: https://doi.org/10.1007/s004190000102 (in English)

ISO 6358:1898. Standard, Pneumatic fluid power – Components using compressible fluids – Determination of flowrate characteristics. Retrieved from https://www.iso.org/standard/12666.html (in English)

Lee, S. (2010). Development and analysis of an air spring model. International Journal of Automotive Technol-ogy, 11(4), 471-479. DOI: https://doi.org/10.1007/s12239-010-0058-5 (in English)

Li, F., Yang, W., & Ding, Y. (2006). Simulation of Static Test of Air-Spring. Advanced Materials Research, 11-12, 713-716. DOI: https://doi.org/10.4028/www.scientific.net/AMR.11-12.713 (in English)

Li, H., Guo, K., Chen, S., Wang, W., & Cong, F. (2013). Design of Stiffness for Air Spring Based on ABAQUS. Mathematical Problems in Engineering, 2013, 1-5. DOI: https://doi.org/10.1155/2013/528218 (in English)

Li, X., He, Y., Liu, W., & Wei, Y. (2015). Research on the vertical stiffness of a rolling lobe air spring. Proceed-ings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(4), 1172-1183. DOI: https://doi.org/10.1177/0954409715585370 (in English)

Li, X., & Li, T. (2013). Research on vertical stiffness of belted air springs. Vehicle System Dynamics, 51(11), 1655-1673. DOI: https://doi.org/10.1080/00423114.2013.819984 (in English)

Li, X., Wei, Y., & He, Y. (2016). Simulation on polytropic process of air springs. Engineering Computations, 33(7), 1957-1968. DOI: https://doi.org/10.1108/EC-08-2015-0224 (in English)

Löcken, F., & Welsch, M. (2015). The Dynamic Characteristic and Hysteresis Effect of an Air Spring. Interna-tional Journal of Applied Mechanics and Engineering, 20(1), 127-145. DOI: https://doi.org/10.1515/ijame-2015-0009 (in English)

Mazzola, L., & Berg, M. (2012). Secondary suspension of railway vehicles - air spring modelling: Performance and critical issues. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(3), 225-241. DOI: https://doi.org/10.1177/0954409712470641 (in English)

Mendia-Garcia, I., Gil-Negrete Laborda, N., Pradera-Mallabiabarrena, A., & Berg, M. (2020). A survey on the modelling of air springs – secondary suspension in railway vehicles. Vehicle System Dynamics, 1-30. DOI: https://doi.org/10.1080/00423114.2020.1838566 (in English)

Nakajima, T., Shimokawa, Y., Mizuno, M., & Sugiyama, H. (2014). Air Suspension System Model Coupled With Leveling and Differential Pressure Valves for Railroad Vehicle Dynamics Simulation. Journal of Computational and Nonlinear Dynamics, 9(3), 1-9. DOI: https://doi.org/10.1115/1.4026275 (in English)

Nieto, A. J., Morales, A. L., González, A., Chicharro, J. M., & Pintado, P. (2008). An analytical model of pneumatic suspensions based on an experimental characterization. Journal of Sound and Vibration, 313(1-2), 290-307. DOI: https://doi.org/10.1016/j.jsv.2007.11.027 (in English)

Oda, N., & Nishimura, S. (1970). Vibration of Air Suspension Bogies and Their Design. Bulletin of JSME, 13(55), 43-50. DOI: https://doi.org/10.1299/jsme1958.13.43 (in English)

Oman, S., & Nagode, M. (2013). On the influence of the cord angle on air-spring fatigue life. Engineering Fail-ure Analysis, 27, 61-73. DOI: https://doi.org/10.1016/j.engfailanal.2012.09.002 (in English)

Pellegrini, C., Gherardi, F., Spinelli, D., Saporito, G., & Romani, M. (2006). Wheel–rail dynamic of DMU IC4 car for DSB: modeling of the secondary air springs and effects on calculation results. Vehicle System Dynamics, 44(sup1), 433-442. DOI: https://doi.org/10.1080/00423110600872960 (in English)

Presthus, M. (2002). Derivation of air spring model parameters for train simulation (PhD dissertation). Luleå University of Technology. (in English)

Qing, O., & Yin, S. (2003). The non-linear mechanical properties of an airspring. Mechanical Systems and Signal Processing, 17(3), 705-0711. DOI: https://doi.org/10.1006/mssp.2001.1434 (in English)

Quaglia, G., & Sorli, M. (2001). Air Suspension Dimensionless Analysis and Design Procedure. Vehicle System Dynamics, 35(6), 443-475. DOI: https://doi.org/10.1076/vesd.35.6.443.2040 (in English)

Sayyaadi, H., & Shokouhi, N. (2010). Effects of air reservoir volume and connecting pipes length and diameter on the air spring behavior in rail vehicles. Iranian Journal of Science and Technology Transaction B: Engineering, 34(B5), 499-508. (in English)

Sayyaadi, H., & Shokouhi, N. (2009). Improvement of Passengers Ride Comfort in Rail Vehicles Equipped with Air Springs. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 3, 592-598. (in English)

Sayyaadi, H., & Shokouhi, N. (2009). New dynamics model for rail vehicles and optimizing air suspension parameters using GA. International Jurnal of Science & Technology, 16(6), 496-512. (in English)

Sihong, Z., Jiasheng, W., & Ying, Z. (2008). Research on theoretical calculation model for dynamic stiffness of air spring with auxiliary chamber. In 2008 IEEE Vehicle Power and Propulsion Conference (pp. 2-7). Harbin, China. DOI: https://doi.org/10.1109/vppc.2008.4677717 (in English)

Spencer, B. F., Dyke, S. J., Sain, M. K., & Carlson, J. D. (1997). Phenomenological Model for Magnetorheological Dampers. Journal of Engineering Mechanics, 123(3), 230-238. DOI: https://doi.org/10.1061/(asce)0733-9399(1997)123:3(230) (in English)

Spiroiu, M. A. (2018). Railway Vehicle Pneumatic Rubber Suspension Modelling and Analysis. Materiale Plas-tice, 55(1), 24-27. DOI: https://doi.org/10.37358/mp.18.1.4956 (in English)

Sun, J. (2011). Calculation of vertical stiffness of air springwith FEM. In 4thANSA & μETA International Conference (pp. 68-72). Thessaloniki, Greece. (in English)

Sun, L., Li, Z., Shen, X., & Zhu, J. (2013). Simulation and Test Study on Dynamic Characteristic of Air Spring with Auxiliary Chamber. In Proceedings of the 2nd International Conference On Systems Engineering and Modeling (pp. 0648-0651). DOI: https://doi.org/10.2991/icsem.2013.131 (in English)

Sundvall, P. (2001). Comparisons between predicted and measured ride comfort in trains – a case study on modelling. Division of Railway Technology. Retrieved from https://trid.trb.org/view/715412 (in English)

Tadeusz, U. (2011). Railway Design, Simulation and Analysis by ADAMS/Rail Software. Akademia Górniczo-Hutnicza. (in English)

Weimin, Y., Canhui, Ch., Yaling, Ch., & Yansha, R. (2004). Finite element analysis of an air spring for automobile suspension. Journal of Beijing University of Chemical Technology, 31(1), 105-109. (in English)

Wen, Y.-K. (1976). Method for Random Vibration of Hysteretic Systems. Journal of the Engineering Mechan-ics Division, 102(2), 249-263. DOI: https://doi.org/10.1061/jmcea3.0002106 (in English)

Wenku, S., Wan, J., Ying, H., Weimin, Y., Hao, Y. & Zubin, L. (2009). Finite element analysis of an air spring concerning initial pressure and parameters of cord fabric layer. In 2009 Asia-Pacific Conference on Computational Intelligence and Industrial Applications (PACIIA). Wuhan, China. DOI: https://doi.org/110.1109/PACIIA.2009.5406380 (in English)

Xu, L. (2020). Mathematical Modeling and Characteristic Analysis of the Vertical Stiffness for Railway Vehicle Air Spring System. Mathematical Problems in Engineering, 2020, 1-12. DOI: https://doi.org/10.1155/2020/2036563 (in English)

Xu, W., He, L., & Shuai, C. (2005). Stiffness calculation and dynamic simulation of air spring. ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. (pp. 1395-1399). California, USA. DOI: https://doi.org/10.1115/DETC2005-84338 (in English)

Zhong, Y., Yang, Q., & Bao, G. (2011). Nonlinear primary resonances of a pneumatic spring under simple harmonic excitations. In Proceedings of 2011 International Conference on Fluid Power and Mechatronics (pp. 229-233). Beijing, China. DOI: https://doi.org/10.1109/FPM.2011.6045763 (in English)

Zhu, H., Yang, J., Zhang, Y., & Feng, X. (2017). A novel air spring dynamic model with pneumatic thermodynamics, effective friction and viscoelastic damping. Journal of Sound and Vibration, 408, 87-104. DOI: https://doi.org/10.1016/j.jsv.2017.07.015 (in English)

Zhu, H., Yang, J., Zhang, Y., Feng, X., & Ma, Z. (2017). Nonlinear dynamic model of air spring with a damper for vehicle ride comfort. Nonlinear Dynamics, 89(2), 1545-1568. DOI: https://doi.org/10.1007/s11071-017-3535-9 (in English)