Methodology of determination of admissible speeds of train movement on difficult sections of railroad plan
DOI:
https://doi.org/10.15802/stp2014/23760Keywords:
speed, railway curves, smoothness of movement, travelling comfort, criteria, curve radius, transitional curve, elevation of outer railAbstract
Purpose. Determination of improvement ways of admissible speeds of train movement on the difficult sections of а railroad plan. Methodology. Mathematical modeling of the train traffic is used to achieve the purpose of research. The average weighted speed and elevation of outer rail is predicted on this basis. Findings. The case analysis of the speeds determination in curved sections of track was carried out. The above mentioned track sections adversely affect the ride comfort and the intensity of the way disorder, as well as the reasons that contribute to the speed limits traffic on the railways of Ukraine. The technique of performing the calculations for determining the permissible train speeds was developed and tested on real curves of railways, were the accelerated movement of trains was introduced. Proposals on automate calculations in distances and services by way of determining the permissible speeds in curves were developed. Originality. Methodology of determining the permissible motion speeds and elevation of outer rails on the difficult sections of the railway plan was developed. This approach allows you to get a rational decisions on reorganization of plan based on local conditions. Practical value. The developed technique of definition of admissible speeds of motion in curves was implemented as a program DopShvid. The program was tested on real railway sections, where the accelerated train motion was introduced.
References
Derzhavni budivelni normy Ukrainy. Sporudy transportu. Zaliznytsi kolii 1520 mm. [State building standards of Ukraine. Transport facilities. Railway tracks 1520 mm]. Kyiv, 2008. 142 p.
Kamenskiy V.B., Shats E.Ya. Soderzhaniye zheleznodorozhnogo puti v krivykh [Railway track maintenance in curves]. Moscow, Transport Publ., 1987. 188 p.
Korzhenevych I.P., Kurhan M.B., Khmelevska N.P. Vyznachennia obiemiv robit dlia zniattia obmezhen shvydkosti, poviazanykh z planom linii [Determination of work amount for removal of the speed limits connected with the line plan]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, issue 41, pp. 116-123.
Korzhenevych I.P. Novi mozhlyvosti proektuvannia perebudovy planu ta vypravlennia kryvykh pry vykorystanni prohramy RWPlan 1.2 [New design opportunities of the plan reconstruction and correction of curves at RWPlan 1.2 using]. Zaliznychnyi Transport Ukrainy − Railway Transport of Ukraine, 2007, no. 5, pp. 79-82.
Mishin V.V. Optimalnoye vozvysheniye v krivykh [Optimum elevation in curves]. Put i putevoye khozyaystvo − Track and Track Facilities, 2009, no. 3, pp. 4-6.
Orlovskiy A.N., Tsyganenko V.V., Vorobeychik L.Ya., Patlasov A.M. Opredeleniye vozvysheniya naruzhnykh relsov v krivykh po fakticheskim skorostyam dvizheniya poyezdov [Determination of vertical setting of rail on the actual train movement speeds]. Zaliznychnyi Transport Ukrainy − Railway Transport of Ukraine, 1999, no. 4, pp. 10-12.
Korzhenevich I.P., Kurgan N.B., Kurgan D.N., Rengach N.G. Otsenka dostovernosti osnovnykh parametrov zheleznodorozhnykh krivykh pri ustanovlenii po nim dopuskayemoy skorosti dvizheniya poyezdov [Evaluation of the reliability of rail curves basic parameters under fixing permissible trains speed movement on them]. Zbirnyk naukovykh prats DIITu «Budivnytstvo» [Proc. of DNURT «Construction»], 2002, issue 10, pp. 106-115.
Bosov A.A., Kurhan M.B., Kurhan D.V., Baidak S.Yu. Otsinka ekonomichnoi efektyvnosti usunennia obmezhen shvydkosti rukhu poizdiv, poviazanykh zi stanom zaliznychnoi kolii [Evaluation of the economic efficiency of removal of train speed limits associated with the state of railway line]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazarian [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, issue 41, pp. 106-115.
Pevzner V.O., Romen Yu.S. Osnovy razrabotki normativov soderzhaniya puti i ustanovleniya skorostey dvizheniya [Fundamentals of track development standards and the speeds movement fixing]. Moscow, Intekst Publ., 2013. 224 p.
Kurhan M.B., Orlovskyi A.M., Patlasov O.M. Pravyla vyznachennia pidvyshchennia zovnishnoi reiky i vstanovlennia dopustymykh shvydkostei v kryvykh diliankakh kolii [Determination rules of outer rail elevation and the establishment of acceptable speeds in curved sections of the track]. Kyiv, 2010. 52 p.
Yershkov O. P. Sopryazheniya krivykh i osobennosti dvizheniya podvizhnogo sostava po nim [Pairing of curves and motion features of rolling stock in curves]. Moscow, Transport Publ., 1973. 96 p.
12. Baluch M. Dobor wartostci parametrow kinematycznych w projektowaniu modernizacji linii kolejowych. Centrum NaukowoTechniczne Kolejnictwa. Problemy Kolejnictwa, 1995, Zeszut 119, pp. 23-25.
13. Thelisson G. Overhead line from start to finish. Railway Gazette Intern, 2012, July, pp. 48-49.
14. UIC Code 513 R (1-st edition, 1.7.94). Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles. Paris, Int. Union of Railways Publ., 1995. 81 p.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
