Developing measures to improve strength indices of supporting structures for head cars of diesel trains DR1A on the basis of experimental-and-theoretical works
DOI:
https://doi.org/10.15802/stp2014/22680Keywords:
bodies of cars, head cars, calculation models, theoretical calculations, diesel trains DR1A, motor bogies, strength indicesAbstract
Purpose. The objective is to determine the stress-strain state of supporting structures of the head car body and the traction transmission unit, which can be created in the operation of emergency situations, and to develop the measures aimed at improving the stress-strain state of these elements. Methodology. In order to achieve this objective, in performing the work an experimental determination of efforts and stress levels in the most loaded elements of supporting structures as well as the traction transmission units was conducted; design models for the theoretical determination of stress and effort levels were developed. Findings. Based on the analysis of the calculation results the best options for the upgrades, which have been put into the basis of proposals aimed at improving the strength indices, were revealed. Originality. Based on the experimental and theoretical studies, scientific monitoring of development works on modernization and improvement of strength indices of supporting structures of head cars of diesel trains DR1A was performed. Practical value. The technical solution to the measures, which are to be carried out beyond the limits of assigned operation lifetime for diesel train of the series specified was developed and transferred to the Ukrzaliznytsia experts to introduce the proposed measures on improving the strength indices.
References
Bondarev O.M., Yagoda D.O., Skoblenko V.M. Eksperymentalno-teoretychna otsinka pokaznykiv mitsnosti balok tsentralnoho pidvishuvannia dyzel-poizdiv DR1A [Experimental-and-theoretical evaluation of strength indices of the central suspension beams of diesel trains]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu [Bulletin of Dniproperovsk National University of Railway Transport], 2011, issue 37, pp. 7-19.
Gorobets V.L., Bondarev O.M., Skoblenko V.M. Analiz ekspluatatsiinoi narobky nesuchykh konstruktsii rukhomoho skladu v zadachakh prodovzhennia terminu yoho ekspluatatsii [Analysis of accrued operating time of supporting structures of rolling stock in problems of prolongation its operation life]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu [Bulletin of Dniproperovsk National University of Railway Transport], 2010, issue 35, pp. 10-16.
Dashchenko A.F., Lazareva D.V., Suryaninov N. G. ANSYS v zadachakh inzhenernoy mekhaniki [ANSYS in problems of engineering mechanics]. Odessa, Astroprint Publ., 2007. 488 p. ,
Lerner B.M., Kovalev N.P., Lebedev V.P., Kuryatnikov A.A. Dizel – poyezda. Ustroystvo, remont, ekspluatatsiya [Diesel trains. Installation, repair, operation]. Moscow, Transport Publ., 1982. 279 p.
Zenkevich O.M. Metod konechnykh elementov v tekhnike [Finite elements method in engineering]. Moscow, Mir Publ., 1975. 542 p.
Mikhaylenko A.A. Dizel-poyezda tipa DR A [Diesel trains of type DR]. Moscow, Transport Publ., 1990. 337 p.
Normy rashcheta i otsenki prochnosti nesushchikh elementov i dinamicheskikh kachestv ekipazhnoy chasti motorvagonnogo podvyzhnogo sostava zheleznykh dorog MPS RF kolei 1520 mm [Norms for calculating and assessing the strength of bearing elements and dynamic qualities of the motor-car-wagon rolling stock of Railways of the MPS, Russian Federation of track gauge 1,520 mm]. Moscow, VNIIZhT Publ., 1997. 147 p.
Potemkin A. Tverdotelnoye modelirovaniye v sisteme KOMPAS–3D (+CD-ROM) [Solid modeling in KOMPAS-3D]. Saint Petersburg, BKhV-Peterburg Publ., 2004. 512 p.
Rakov V.A. Lokomotivy i motor-vagonnyy podvizhnoy sostav zheleznykh dorog Sovetskogo Soyuza (1976-1985 gg.) [Locomotives and motor-car rolling stock of the Soviet Union railways (1976-1985)]. Moscow, Transport Publ., 1990. 238 p.
Rozrobka rekomendatsii po pidvyshchenniu terminu ekspluatatsii dyzel–poizdiv D1, DR1 na pidstavi provedennia eksperymentalno-analitychnykh robit», № DR 0199U000049 [Development of recommendations to improve the operation life of diesel trains D1, DR1 on the basis of experimental and analytical work, No. DR 0199U000049]. Dnipropetrovsk, 1999. 157 p.
Boyer Howard E. Metals Handbook, 8th Edition. Volume 10: Failure Analysis and Prevention. Fatigue Failures. American Society for Metals Publ., 1975. 604 p.
Yoshida S., Innagaki N., Kanao M. Effect of size and frequency on fatigue properties of SM50B butt welded jointю. Journal Welding Society, 1978, no. 9, pp. 5-10.
Mitsui Y., Kurobane Y., Harada K., Konomi M. Fatigue crack growth behaviours at the toe of fillet welded joints under plane bending load. Journal of the Japan Welding Society, 1983, no. 3, pp. 58-65.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
