INTERACTION DYNAMICS OF SOME TYPES OF FREIGHT CARS WITH A RAILWAY TRACK
DOI:
https://doi.org/10.15802/stp2020/217649Keywords:
cargo, flat wagon, hopper car, gondola car, dynamic indicators, curved track sections, track and rolling stock interaction indicators, movement speedAbstract
Purpose. An integral and essential feature of the modern wagon fleet is its large scale. For the entire fleet of rolling stock, even the smallest structural changes take on enormous proportions. The aim of the work is a theoretical study of the influence of the inertial characteristics of bodies of various types of freight rolling stock, taking into account the loading mode and the movement speed, on their main dynamic and interaction indicators with the track structure. Methodology. Theoretical studies were carried out by the method of mathematical and computer modeling of the dynamic load during the movement of some types of freight cars: gondola cars model 12-532, hopper cars for transporting coal model 12-4034 and flat wagons model 13-401 on standard bogies 18-100 at speeds in the range from 50 to 90 km/h on curves of small and medium radii. Findings. The analysis of theoretical studies of the dynamic qualities and interaction indicators of freight rolling stock and the railway track is presented. In the course of theoretical studies and after modeling taking into account the oscillation processes of freight cars at different loading modes the dependences of the main dynamic indicators on the movement speed were obtained. Originality. The influence of inertial characteristics of bodies of various types of freight rolling stock and loading modes on the dynamic load of a car was first explored in order to solve the problem of predicting the rolling stock dynamics and indicators of its interaction with the track. The results of theoretical studies taking into account the movement speed along curved track sections of small and medium radius were obtained. Practical value. The presented calculation results make it possible to determine the optimal values of such parameters as dead weight, height of the mass center and car base length when solving the problems of modernizing the operated car fleet and determining the reserves for increasing their carrying capacity. They make it possible to solve the problems of finding the optimal directions for modernizing the rail vehicle; contribute to the creation of technical conditions for the manufacture of new and modernization of the operated freight cars and are aimed at increasing the level of reliability and safety of the transportation process in modern conditions on the railway transport.
References
Blokhin, Ye. P., & Manashkin, L. A. (1982). Dinamika poezda (nestatsionarnye prodolnye kolebaniya). Moscow: Transport. (in Russian)
Danilenko, E. I. (2010). Zaliznychna koliia: pidruchnyk dlia vyshchykh navchalnykh zakladiv. (Vol. 2). Kyiv: Inpres. (in Ukrainian)
Danovich, V. D. (1982). Spatial Cars Oscillations in Inertia Track. (Dysertatsiia doktora tekhnichnykh nauk). Dnepropetrovsk Institute of Railway Transport Engineering, Dnеpropetrovsk. (in Russian)
Danovich, V. D., & Malysheva, A. A. (1998). Mathematical Model of Spatial Oscillations of the Coupling of Five Cars Moving Along a Rectilinear Section of the Track. Transport. Stress loading and durability of a rolling stock, 62-69. Dnepropetrovsk. (in Russian)
Rukhomyj sklad zaliznycj. Normy dopustymogho vplyvu na zaliznychnu koliju1520 mm. 33 DSTU 7571:2014 (2014). (in Ukrainian)
Vahony vantazhni. Vymohy do mitsnosti ta dynamichnykh yakostei, 58 DSTU 33211:2017 (2017) (in Ukrainian)
Kozachenko, D. M., Papakhov, O. Y., & Hermaniuk, Y. N. (2020). Development of car traffic volumes organization methods in the Russian Empire and in the USSR. Science and Transport Progress, 3(87), 37-61. DOI: https://doi.org/10.15802/stp2020/208934 (in Russian)
Lazaryan, V. A., Dlugach, L. A., & Korotenko, M. L. (1972). Ustoychivost dvizheniya relsovykh ekipazhey. Kiev: Naukova dumka. (in Russian)
Litvin, V., Myamlin, S., Malysheva, A., & Neduzhaja, L. (1994). Dinamicheskie pokazateli nekotorykh tipov vagonov. Mechanics of transport: train weight, speed, safety of movement. Interuniversity collect. of sc. papers. Dniepropetrovsk, DIIT, 95-104. (in Russian)
Lysyuk, V. S. (2002). Prichiny i mekhanizmy skhoda kolesa s relsa. Problema iznosa koles i relsov. Moscow: Transport. (in Russian)
Tretyakov, A. V. (2004). Upravlenie individualnym resursom vagonov v ekspluatatsii: monografiya. St. Petersburg: OM-Press. (in Russian)
Shvets, A. O. (2018). Specifics of determining the moments of inertia a freight wagons bodies. Bulletin of Certification of Railway Transport, 5(51), 20-34. (in Ukrainian)
Shvets, A. O. (2019). Gondola cars dynamics from the action of longitudinal forces. Science and Transport Progress, 6(84), 142-155. DOI: https://doi.org/10.15802/stp2019/195821 (in Ukrainian)
Aceituno, J. F., Wang, P., Wang, L., & Shabana, A. A. (2017). Influence of rail flexibility in a wheel/rail wear prediction model. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231(1), 57-74. DOI: https://doi.org/10.1177/0954409715618426 (in English)
Blokhin, E. P., Pshinko, O. M., Danovich, V. D., & Korotenko, M. L. (1998). Effect of the state of car running gears and railway track on wheel and rail wear. Proceedings of the 4th International Conference on Railway Bogies and Running Gears (рр. 313-323), Technical University of Budapest. Budapest. (in English)
Cao, T. N. T., Reddy, J. N., Ang, K. K., Luong, V. H., Tran, M. T., & Dai, J. (2018). Dynamic analysis of three-dimensional high-speed train-track model using moving element method. Advances in Structural Engineering, 21(6), 862-876. DOI: https://doi.org/10.1177/1369433217733763 (in English)
Gong, C., Iwnicki, S., & Bezin, Y. (2016). The effect of railway vehicle dynamics on the lateral alignment of track. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(1), 258-270. DOI: https://doi.org/10.1177/0954409714536548 (in English)
Ingvardson, J. B., & Nielsen, O. A. (2018). Effects of new bus and rail rapid transit systems-an international review. Transport Reviews, 38(1), 96-116. DOI: https://doi.org/10.1080/01441647.2017.1301594 (in English)
Ishiguri, K., Kazato, A., Miyahara, K., Niiyama, M., & Sasaki, K. (2017). Improvement of the lateral ride comfort on railway vehicles by application of pneumatic actuators for centering. Quarterly Report of RTRI (Railway Technical Research Institute), 58(1), 14-20. DOI: https://doi.org/10.2219/rtriqr.58.1_14 (in English)
Johnsson, C., Laureshyn, A., & De Ceunynck, T. (2018). In search of surrogate safety indicators for vulnerable road users: a review of surrogate safety indicators. Transport Reviews, 38(6), 765-785. DOI: https://doi.org/10.1080/01441647.2018.1442888 (in English)
Kurhan, M., & Kurhan, D. (2019). Providing the railway transit traffic Ukraine-European Union. Pollack Pe-riodica, 14(2), 27-38. DOI: https://doi.org/10.1556/606.2019.14.2.3 (in English)
McKinnon, A. C. (2016). Freight Transport Deceleration: Its Possible Contribution to the Decarbonisation of Logistics. Transport Reviews, 36(4), 418-436. DOI: https://doi.org/10.1080/01441647.2015.1137992 (in English)
Razinkin, N. E., Voronova, N. I., Podlesnikov, Y. D., & Danilov, S. N. (2019). The influence of additional discharge of the brake line on the longitudinal dynamics of the train during braking. Journal of Mechanical Engineering Research and Developments, 42(3), 6-9. DOI: https://doi.org/10.26480/jmerd.03.2019.06.09 (in English)
Shatunov, O. V., & Shvets, A. O. (2019). Study of dynamic indicators of flat wagon with load centre shift. Science and Transport Progress, 2(80), 127-143. DOI: https://doi.org/10.15802/stp2019/165160
(in English)
Shvets, A. O., & Bolotov, О. О. (2019). Influence of loads from the axis of a gondola car on its dynamic indicators and railroad tracks. Science and Transport Progress, 1(79), 151-166. DOI: https://doi.org/10.15802/stp2019/158127 (in English)
Uyulan, Ç., Gokasan, M., & Bogosyan, S. (2018). Stability and bifurcation analysis of the non-linear railway bogie dynamics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(16), 2787-2802. DOI: https://doi.org/10.1177/0954406217727304 (in English)
Xing, L. L., Wang, Y. M., & Dong, X. Q. (2018). Effect of the Wheel/Rail contact geometry on the stability of railway vehicle. IOP Conference Series: Materials Science and Engineering, 392(6), 1-11. DOI: https://doi.org/10.1088/1757-899X/392/6/062134 (in English)
Zakeri, J. A., Mosayebi, S. A., & Esmaeili, M. (2016). Numerical and field investigations of track dynamic behavior caused by light and heavy railway vehicles. Journal of Theoretical and Applied Mechanics (Poland), 54(3), 871-879. DOI: https://doi.org/10.15632/jtam-pl.54.3.871 (in English)
Zhu, T., Yang, B., Yang, C., Xiao, S., Yang, G., & Yang, B. (2018). The mechanism for the coupler and draft gear and its influence on safety during a train collision. Vehicle System Dynamics, 56(9), 1375-1393. DOI: https://doi.org/10.1080/00423114.2017.1413198 (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 A. O. Shvets
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.