THE CALCULATION OF THE ELASTIC PROPERTIES OF FRICTION CARBON COMPOSITES FOR ROLLING STOCK

Authors

  • V. M. Starchenko East Ukrainian national University named after Vladymyr Dahl,

DOI:

https://doi.org/10.15802/stp2006/18755

Keywords:

fixed carbohydrates, straight bars

Abstract

The theory and design procedure of elastic characteristics and technical constants of frictional carbon – carbon composite materials, spatially reinforced by direct small diameter rods, have been presented. An analysis of the calculations output and comparison of the 3-D and 4-DL structures have been executed; an estimation of the accuracy of the proposed technique has been presented.

Author Biography

V. M. Starchenko, East Ukrainian national University named after Vladymyr Dahl

V. M. Starchenko

Downloads

Published

2006-06-25

How to Cite

Starchenko, V. M. (2006). THE CALCULATION OF THE ELASTIC PROPERTIES OF FRICTION CARBON COMPOSITES FOR ROLLING STOCK. Science and Transport Progress, (11), 160–166. https://doi.org/10.15802/stp2006/18755

Issue

No. 11 (2006): ISSUE 11

Section

ROLLING STOCK AND TRAIN TRACTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.