DEVELOPMENT OF TECHNOLOGY OF REPAIR OF WORN PARTS OF THE ROLLING STOCK BY LAYERED COATINGS

Authors

  • V. V. Artemchuk Dnipropetrovsk national University of railway transport named after academician V. Lazaryan,

DOI:

https://doi.org/10.15802/stp2006/18674

Keywords:

recovery technology, wear of details, layered coating

Abstract

For maintenance of the existing rolling-stock in working order it is necessary to carry out quality repairs. One of directions of development of repair manufacture is the development of new technologies of restoration of the worn out details. The article represents a newly-designed technology of applying layered coverings by programmed electrolytic iron plating.

Author Biography

V. V. Artemchuk, Dnipropetrovsk national University of railway transport named after academician V. Lazaryan

V. V. Artemchuk

Downloads

Published

2006-06-25

How to Cite

Artemchuk, V. V. (2006). DEVELOPMENT OF TECHNOLOGY OF REPAIR OF WORN PARTS OF THE ROLLING STOCK BY LAYERED COATINGS. Science and Transport Progress, (11), 92–94. https://doi.org/10.15802/stp2006/18674

Issue

No. 11 (2006): ISSUE 11

Section

OPERATION AND REPAIR OF TRANSPORT MEANS

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.