Lightweight concretes with fly–ash of Prydniprovsk thermal power station
DOI:
https://doi.org/10.15802/stp2013/17978Keywords:
fly-ash, cement, after products of industry, efficiency, concrete mixture, lightweight concretes, granulated slag, fillerAbstract
Purpose. Determination of conformities to law of influence of expense of components of easy concretes, which turn out on the basis of local afterproducts of industry, on their basic properties under conditions of enhanceable efficiency of the use of cement. Methodology. Experimental studies on optimization of structures and properties of concrete were carried out with use of mathematical planning experiments methods. All experiments were carried out on orthogonal design with three variables. Cement, water and additives PLKP-2 consumption were taken as varied factors. Findings. Vast experimental studies on determination of rational compositions of concrete mixtures were conducted with the use as fillers of granulated slag from iron and steel plant named after Petrovskiy and Dnepr sand, as binding agent Krivoy Rog portland-cement II/B-Ш-400, as filler fly-ash of Pridneprovsk Thermal Power Station. Efficiency coefficient of cement use was adopted as basic criterion of concrete composition rationality, it is determined on the relation of the attained durability per unit weight of used cement. For greater efficiency coefficient of cement use regularity of rational grain composition of components previously obtained was adopted, it is provided at a ratio of a large fraction consumption to medium and small 52:23:25, and their sizes are approximately 100:10:1. Experimental studies with use of mathematical planning experiments method were carried out. By results of their processing isofields were constructed according to the strength and effectiveness of the use of cement ratio of the studied factors. Originality. By strength comparative tests of hardened concrete with various local secondary resources, modified with complex plasticizer PLKP-2 additive, it was found that lightweight concrete with the density of 1700…1800 kg/m3 and concrete compressive strength from 5 to 20 MPa on the basis of granulated slag from the iron and steel plant named after Petrovskiy filled with fly-ash of Pridneprovsk Thermal Power Station during ensuring of rational grain composition of components with a ratio of major components of the fractions to medium and small 52:23:25 are the most effective. Practical value. Compositions of lightweight fine grained mixture based on granulated slag from the iron and steel plant named after Petrovskiy filled with fly-ash of Pridneprovsk Thermal Power Station and modified with complex plasticizer PLKP-2 additive were determined. They provide required concrete compressive strength within 5…10 MPa at a reduced cement consumption by approximately 20% as compared to the traditionally used compositions for these purposes.
References
Bolshakov V.I., Shcherbak S.A., Yeliseyeva M.A. Povysheniye reaktsionnoy sposobnosti domennogo granulirovannogo shlaka [Increase of reactionary ability of blast-furnace granulated slag], 2011, issue 59, vol. II, pp. 34-38.
Dvorkin L.I., Dvorkin O.L.Stroitelnyye mineralnyye vyazhushchiye materialy [Building mineral binding materials]. Moscow, Infra-Inzheneriya Publ., 2011. 511 p.
Bolshakov V.I., Yeliseyeva M.A., Shcherbak O.S., Shcherbak S.A. Melkozernistyye betony na osnove mekhanoaktivirovannykh domennykh granulirovannykh shlakov [Fine grained concrete on the basis of mechanoactivated blast-furnace granulated slags]. Theoretical Foundations of Civil Engineering. Polish-Ukrainian – Lithuanian Transactions, 2012, vol. 20, pp. 431-436.
Miryuk O.A. Melkozernistyye betony na osnove tekhnogennogo zapolnitelya [Fine-grained concretes on the basis of technogenic filler]. Beton i zhelezobeton v Ukraine – Concrete and reinforced concrete in Ukraine, 2010, issue 2, pp. 5-8.
Netesa N.I., Palanchuk D.V. Legkiyye betony na osnove granshlaka zavoda imeni Petrovskogo [Lightweight concretes on the basis of granulated slag from the iron and steel plant named after Petrovskiy]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue 33, pp. 156-161.
Netesa N.I., Palanchuk D.V. Proyektirovaniye sostavov legkikh betonov so vtorichnymi resursami Dneprovskogo regiona [Planning of lightweight concrete compositions with the recoverable resources in Dnepr region]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue. 33, pp.180-184.
Bolshakov V.I., Shcherbak S.A., Yeliseyeva M.A., Kalinichenko N.V. Povysheniye kachestva stroitelnykh materialov za schet primeneniya tekhnogennykh otkhodov i mekhanoaktivatsii smesi [Improving building materials quality through the use of technogenic waste and mechanical activation of the mixture]. Naukovyi visnyk budivnytstva [Construction Scientific Bulletin], 2010, issue 59, pp. 223-226.
Sergeyev A.M. Ispolzovaniye v stroitelstve otkhodov energeticheskoy promyshlennosti [Use energy industry waste in construction]. Kyiv, Budivelnyk Publ., 1984. 120 p.
SNiP 2.03.13-88. Poly [Floors]. Moscow, Gosstroy Publ, 1989. 15 p.
Shcherbak S.A., Kalynychenko N.V., Yelisieieva M.O. Zahalna kharakterystyka metalurhiinykh shlakiv [General description of metallurgical slags]. Visnyk Prydniprovskoi derzhavnoi akademii budivnytstva ta arkhitektury [Bulletin of Prydniproprovsk State Academy of Construction and Architecture], 2010, issue 2-3, pp. 23-28.
Aggarwal V., Dr. Gupta S.M., Dr. Sachdeva S.N. Concrete Durability Through High Volume Fly ash Concrete. International Journal of Engineering Science and Technology, 2012, no. 2, pp. 4473-4477.
Marthong C., Agrawal T.P. Effect of Fly Ash Additive on Concrete Properties. International Journal of Engineering Research and Applications, 2012, no. 2, pp. 1986-1991.
Raheem А.А., Olasunkanmi B.S., Folorunso C.S. Saw Dust Ash as Partial Replacement for Cement in Concrete. Organization, technology and management in construction, 2012, no. 4, pp. 474-480.
Bakri A.M.M.A., Mohammed H., Kamarudin H., KhairulI Nizar I., Zarina Y. Review on fly ash-based geopolymer concrete without Portland Cement. Journal of Engineering and Technology Research, 2011, no. 1, pp. 1-4.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.