Analysis of existing and prospective technical control systems of numeric codes automatic blocking
DOI:
https://doi.org/10.15802/stp2013/17961Keywords:
automatic block systems, dispatcher control, diagnosis, monitoring, hardware and software, state before failure, objects of diagnosisAbstract
Purpose. To identify the characteristic features of the engineering control measures system of automatic block of numeric code, identifying their advantages and disadvantages, to analyze the possibility of their use in the problems of diagnosing status of the devices automatic block and setting targets for the development of new diagnostic systems. Methodology. In order to achieve targets the objective theoretical and analytical method and the method of functional analysis have been used. Findings. The analysis of existing and future facilities of the remote control and diagnostics automatic block devices had shown that the existing systems of diagnosis were not sufficiently informative, designed primarily to control the discrete parameters, which in turn did not allow them to construct a decision support subsystem. In developing of new systems of technical diagnostics it was proposed to use the principle of centralized distributed processing of diagnostic data, to include a subsystem support decision-making in to the diagnostics system, it will reduce the amount of work to maintain the devices blocking and reduce recovery time after the occurrence injury. Originality. As a result, the currently existing engineering controls facilities of automatic block can not provide a full assessment of the state distillation alarms and locks. Criteria for the development of new systems of technical diagnostics with increasing amounts of diagnostic information and its automatic analysis were proposed. Practical value. These results of the analysis can be used in practice in order to select the technical control of automatic block devices, as well as the further development of diagnostic systems automatic block that allows for a gradual transition from a planned preventive maintenance service model to the actual state of the monitored devices.
References
Birger I.A. Tekhnicheskaya diagnostika [Technical diagnostics]. Moscow, Mashinostroeniye Publ., 1978, 240 p.
Boynik A.B. Diagnostirovaniye ustroystv avtomatiki i agregatnykh yedinits [Diagnosis of automatic devices and modular units]. ChP Izd-vo «Novoye slovo», 2008. 304 p.
Bondarenko B.M. Povysheniye bezopasnosti dvizheniya poyezdov putem usovershenstvovaniya protsessa diagnostiki priborov zheleznodorozhnoy avtomatiki [Improving of trains movement safety with the way of process enhancement of railway automation diagnosis devices]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dniproperovsk National University named after Academician V. Lazaryan], 2012, issue 42, pp. 7-11.
Gazov O.K., Kononov V.A., Nikitin A.B. Sistemy dispetcherskoy tsentralizatsii [Centralized dispatching systems]. Moscow, Marshrut Publ., 2002. 407 p.
Dmitrenko I.Ye. Tekhnicheskaya diagnostika i avtokontrol sistem zheleznodorozhnoy avtomatiki i telemekhaniki [Technical diagnostics and auto control of railway automation and telemechanics systems]. Moscow, Transport Publ., 1986. 144 p.
Dunayev D.V., Romantsev I.O., Gavrilyuk V.I. Analiz otkazov i metody kontrolya relsovykh tsepey [Failure analysis techniques and controlled the middle of track circuits]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dniproperovsk National University named after Academician V. Lazaryan], 2010, issue 32, pp. 212-217.
Protopov O.V., Mozzhevilov A.B. Sistema diagnostiki tekhnicheskikh sredstv avtoblokirovki i pereyezdnoy signalizatsii [Diagnosis technical means of blocking and level crossing signalization]. Avtomatika, svyaz i informatika − Automation, communications and computer science , 2008, no. 12, pp. 5-8.
Sapozhnikov V.V., Sapozhnikov Vl.V. Osnovy tekhnicheskoy diagnostik [Basics of technical diagnostic]. Moscow, Marshrut Publ., 2004. 318 p.
Sapozhnikov Vl.V. Sistemy dispetcherskoy tsentralizatsii [Systems of centralized traffic control]. Moscow, Marshrut Publ., 2002. 407 p.
10. Sfarbakov A.M., Lukyanov A.V., Pakhomov S.V. Osnovy tekhnicheskoy diagnostiki [Basics of technical diagnostic]. Іrkutsk, Izd-vo ІrGUPS Publ., 2006. 216 p.
11. Fedorchuk A.Ye., Sepetiy A.A., Ivanchenko V.N. Novyye informatsionnyye tekhnologii: avtomatizatsiya tekhnicheskogo diagnostirovaniya i monitoringa ustroystv ZhAT [New information technology: the automation of technical diagnostics and monitoring devices]. Rostov, Izd-vo RostGUPS Publ., 2008. 443 p.
12. Shablin A.N., Nanosov G.F., Kapusta P.A. Tsentr tekhnicheskoy diagnostiki i monitoringa na Oktyabrskoy doroge [Center of technical diagnostics and monitoring on in the October road]. Avtomatika, svyaz i informatika − Automation, Communications and Informatics , 2007, no. 5, pp. 23-25.
13. Mascardi V., Briola D., Martelli M. Monitoring and diagnosis railway signaling. International Workshop on Computational Intelligence in Security for Information Systems. Genova, 2008, pp. 23-31.
14. Zoetewij P., Pietersma J., Abreu R. Automated fault diagnosis in embedded systems. Proc. of the 2nd IEEE Intern. Conf. on Secure Systems Integration and Reliability Improvement. Yokohama, IEEE Publ., 2008, pp. 103-110.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 A. M. Beznarytnyy, V. I. Gavrilyuk
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
