AUTOMATED CALCULATION OF CAPACITY OPERATED METAL OF SPAN STRUCTURES OF RAILWAY BRIDGES

Authors

  • O. O. Rashchepkin Scientific-engineering and traffic center of the Siberian state University of railway engineering, Russian Federation

DOI:

https://doi.org/10.15802/stp2007/17886

Keywords:

automation system for calculating, railway bridge, operation

Abstract

The existent carrying capacity evaluation method of operational bridge structures (Classification method) was developed in 1930. All the calculations represented there are oriented on hand computation methods and do not take into account some features of the constructions. The article shows a possibility of using direct calculation method of steel span structures on the basis of automated calculations.

Author Biography

O. O. Rashchepkin, Scientific-engineering and traffic center of the Siberian state University of railway engineering

O. O. Rashchepkin

Downloads

Published

2007-02-25

How to Cite

Rashchepkin, O. O. (2007). AUTOMATED CALCULATION OF CAPACITY OPERATED METAL OF SPAN STRUCTURES OF RAILWAY BRIDGES. Science and Transport Progress, (14), 198–207. https://doi.org/10.15802/stp2007/17886

Issue

No. 14 (2007): ISSUE 14

Section

TRANSPORT CONSTRUCTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.