RESEARCH OF WHEEL-RAIL WEAR DUE TO NON-SYMMETRICAL LOADING OF A FLAT CAR
DOI:
https://doi.org/10.15802/stp2019/177457Keywords:
load, flat car, lozenging of bogie side frames, load gravity centre displacement, angle of wheel set hunting, travel speed, wear factorAbstract
Purpose. The paper is aimed at determining the influence of non-symmetrical loading of a flat car on the magnitude of the wear factor of a wheel-rail pair when changing the operation parameters that occur in operation. Methodology. The dynamic loading of the flat car, model 13-401 with typical three-piece bogies is studied using a model of spatial oscillations of a five-car coupling with the help of mathematical and computer simulation. Theoretical calculations are performed for the most dangerous sections of the railway track – small and medium radius curves in the range of permissible speeds. Findings. The indicators of wear of the rolling stock wheels and the rails are analysed on the example of flat cars in the presence of a longitudinal and transverse displacement of the load mass centre relative to the car symmetry centre. To obtain information on the effect of permissible deviations of the arrangement of cargo in the car on the magnitude of the dynamic loading of the wheel-rail contact, the authors performed theoretical studies of the spatial variations of the rail carriage and its interaction with the track. Originality. To determine the wear of the wheel-rail pair, the effect of displacement in two directions from the central axis of symmetry of the load gravity centre was studied, taking into account the value of the travel speed along the curved sections of the small and medium radius using a mathematical model of coupling of five freight cars. Practical value. As a result of the theoretical studies carried out, the authors assessed such factors as wear factor, directional force, and hunting of the wheel set of freight rolling stock in the event of load gravity centre displacement when moving along curved sections of the railway track. To establish the possible cause of intensive wear of the wheels and rails, the following parameters were analysed: lozenging of front bogie side frames; hunting of the left side frame of the front bogie; mutual longitudinal movement of the side frame and axle box of the front wheel set; mutual hunting of the left side frame of the bogie relative to the front wheel set.
References
Boronenko, Y. P., Rudakova, Y. A., & Orlova, A. M. (2009). Innovatsii v telezhkakh gruzovykh vagonov: realnost i perspektivy. Nauka i transport, S, 14-17. (in Russian)
Danovich, V. D., & Anisimov, P. S. (1989). Kolebaniya v gorizontalnoy ploskosti 4-osn. platformy s nesimmetrichno raspolozhennym tyazhelovesnym gruzom. Vestnik of the Railway Research Institute, 3, 5-9. (in Russian)
Danovich, V. D., & Malysheva, A. A. (1998). Mathematical Model of Spatial Oscillations of the Coupling of Five Cars Moving Along a Rectilinear Section of the Track. In Transport. Stress loading and durability of a rolling stock (рр. 62-69). Dnepropetrovsk. (in Russian)
Danovich, V. D. (1981). Spatial Cars Oscillations in Inertia Track. (Dysertatsiia doktora tekhnichnykh nauk). Dnepropetrovsk Institute of Railway Transport Engineering, Dnеpropetrovsk. (in Russian)
Shvets, Angela O., Bolotov, O. M., Saparova, L. S., & Shvets, Angelika O. (2019). Wear Wheels and Rails at the Uneven Loading of Gondola Cars. Visnyk sertyfikatsii zaliznychnoho transportu, 1(53), 4-17. (in Ukrainian)
Shatunov, A. V., Sobornitskaya, V. V., Kovtun, E. N., & Markova, O. M. (2001). Opredelenie pokazatelej bezopasnosti dvizheniya platform s porozhnim avtopoezdom. Transport, 7, 116-120. (in Russian)
Petrov, G. I., Chernyaev, N. Y., & Meshcheryakov, M. A. (2015). Modernization of Cargo Bogies: Mounting of a Transverse Connection Assembly. Mir transporta. 5, 58-62. (in Russian)
Blokhin, E. P., Pshinko, O. M., & Danovich, V. D. (1998). Razrabotka rekomendatsiy po snizheniyu iznosa koles i relsov za schet snizheniya sil dinamicheskogo vzaimodeystviya zheleznodorozhnykh ekipazhey i puti s uchetom statsionarnykh i nestatsionarnykh rezhi-mov dvizheniya (Vol. 1-3). Dnеpropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Dnеpropetrovsk. (in Russian)
Martynov, I. E., Masliev, V. G., Mokrousov, S. D., Nesterenko, V. I., & Shcherbakov, V. P. (2013). Improved design cargo trucks-cars out to prevent wear paddle wheels and rails. Zbirnyk naukovykh prats Ukrainskoi derzhavnoi akademii zaliznychnoho transportu, 139, 25-34. (in Russian)
Shatunov, A. V., Sobornitskaya, V. V., Kovtun, E. N., & Markova, O. M. (2000). Teoreticheskaya otsenka dinamicheskikh kachestv platform, zagruzhennykh avtopoezdom s gruzom. Transport, 3, 21-27. (in Russian)
Tekhnicheskie usloviya razmeshcheniya i krepleniya gruzov. Prilozhenie 3 k Soglasheniyu o mezhdunarodnom zheleznodorozhnom gruzovom soobshchenii (SMGS). (2011). Kyiv: Devolta. (in Russian)
Shatunov, A. V. (1992). Nagruzhennost stsepa iz dvukh platform pri resursosberegayushchem sposobe transportirovki dlinnomernykh gruzov. (Avtoreferat dysertatsii kandydata tekhnichnykh nauk). Dnepropetrovsk Institute of Railway Transport Engineering, Dnеpropetrovsk. (in Russian)
Shvets, A. O. (2018). Influence of the longitudinal and transverse displacement of the cargo gravity center in gondola cars on their dynamic indicators. Science and Transport Progress, 5(77), 115-128. doi: http://doi.org/10.15802/stp2018/146432 (in Ukrainian)
Ashtiani, H., Rakheja, S., & Ahmed, A. K. W. (2017). Influence of friction wedge characteristics on lateral response and hunting of freight cars with three-piece bogies. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231(8), 877-891. doi: http://doi.org/10.1177/0954409716647095 (in English)
Blokhin, E. P., Pshinko, O. M., Danovich, V. D., & Korotenko, M. L. (1998). Effect of the state of car running gears and railway track on wheel and rail wear. Railway Bogies and Running Gears: Proceedings of the 4th International Conference (рр. 313-323). Budapest. (in English)
Xu, J., Wang, P., Wang, L., & Chen, R. (2016). Effects of profile wear on wheel-rail contact conditions and dynamic interaction of vehicle and turnout. Advances in Mechanical Engineering, 8(1), 1-14. doi: http://doi.org/10.1177/1687814015623696 (in English)
Wu, B. W., Chen, G. X., Lu, J. Z., Zhu, Q., & Kang, X. (2019). Generation mechanism and remedy method of rail corrugation at a sharp curved metro track with Vanguard fasteners. Journal of Low Frequency Noise Vibration and Active Control. doi: http://doi.org/10.1177/1461348419845992 (in English)
Lack, T., Gerlici, J., & Manurova, M. (2016). Freight car bogie properties analysis by means of simulation computations. Manufacturing Technology, 16(4), 733-739. (in English)
Shukla, S., Kumar, U., Sharma, S. K., Gupta, P., & Kumar, A. (2017). Light weight freight rolling stock bogie frame: Design methodology validated with field oscillation trials. International Journal of Vehicle Structures and Systems, 9(4), 245-250. doi: http://doi.org/10.4273/ijvss.9.4.10 (in English)
Cole, C., Spiryagin, M., Wu, Q., & Sun, Y. Q. (2017). Modeling, simulation and applications of longitudinal train dynamics. Vehicle System Dynamics, 55(10), 1498-1571. doi: http://doi.org/10.1080/00423114.2017.1330484 (in English)
Shatunov, O. V., & Shvets, A. О. (2019). Study of dynamic indicators of flat car with load centre shift. Science and Transport Progress, 2(80), 127-143. doi: http://doi.org/10.15802/stp2019/165160 (in English)
Wu, Q., Spiryagin, M., & Cole, C. (2016). Longitudinal train dynamics: an overview. Vehicle System Dynamics, 54(12), 1688-1714. doi: http://doi.org/10.1080/00423114.2016.1228988 (in English)
Ye, Y., & Ning, J. (2019). Small-amplitude hunting diagnosis method for high-speed trains based on the bogie frame’s lateral–longitudinal–vertical data fusion, independent mode function reconstruction and linear local tangent space alignment. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. doi: http://doi.org/10.1177/0954409718825412 (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.