THE SELECTION OF THE GEAR RATIO BRAKE LINKAGE OF PASSENGER AND FREIGHT CARS MAXIMUM ALLOWABLE FRICTION WHEEL RAIL

Authors

  • Yu. Ya. Vodianikov SE "Ukrainian scientific-research Institute of car-building", Ukraine
  • S. V. Kukin SE "Ukrainian scientific-research Institute of car-building", Ukraine
  • K. L. Zhykhartsev SE "Ukrainian scientific-research Institute of car-building", Ukraine

DOI:

https://doi.org/10.15802/stp2007/17729

Keywords:

brake, freight car, clutch

Abstract

The authors have constructed nomographs of dependence of the gear ratio of a lever-type braking gear on the tare of passenger and freight cars according to the calculated limit coefficient of wheel/rail clutch. It has been shown that for passenger cars with the tare of 53 to 57 ton-force, at a gear ratio 5.3, the 15% skidding reserve in the speed range of 90 to 160 km/h is not maintained. For freight cars with the tare up to 22 ton-force, at a gear ratio 5.72, the basic condition of absence of skidding is not maintained either.

Author Biographies

Yu. Ya. Vodianikov, SE "Ukrainian scientific-research Institute of car-building"

Yu. Ya. Vodianikov

S. V. Kukin, SE "Ukrainian scientific-research Institute of car-building"

S. V. Kukin

K. L. Zhykhartsev, SE "Ukrainian scientific-research Institute of car-building"

K. L. Zhykhartsev

Published

2007-04-25

How to Cite

Vodianikov, Y. Y., Kukin, S. V., & Zhykhartsev, K. L. (2007). THE SELECTION OF THE GEAR RATIO BRAKE LINKAGE OF PASSENGER AND FREIGHT CARS MAXIMUM ALLOWABLE FRICTION WHEEL RAIL. Science and Transport Progress, (15), 72–74. https://doi.org/10.15802/stp2007/17729

Issue

Section

OPERATION AND REPAIR OF TRANSPORT MEANS