TECHNOLOGICAL FEATURES OF MANUFACTURE OF REINFORCED RAIL WHEEL

Authors

  • I. O. Vakulenko Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0002-7353-1916
  • O. M. Perkov The Institute of Ferrous Metallurgy named after Z. I. Nekrasov National Academy of Science of Ukraine, Ukraine

DOI:

https://doi.org/10.15802/stp2008/17403

Keywords:

wheels, wagon, steel

Abstract

The results of research of influence of parameters of thermomechanical hardening on the structure, complex of physico-mechanical and service properties of hardened railway wheels are presented.

Author Biographies

I. O. Vakulenko, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

I. O. Vakulenko

O. M. Perkov, The Institute of Ferrous Metallurgy named after Z. I. Nekrasov National Academy of Science of Ukraine

O. M. Perkov

Downloads

Published

2008-02-25

How to Cite

Vakulenko, I. O., & Perkov, O. M. (2008). TECHNOLOGICAL FEATURES OF MANUFACTURE OF REINFORCED RAIL WHEEL. Science and Transport Progress, (20), 216–218. https://doi.org/10.15802/stp2008/17403

Issue

No. 20 (2008): ISSUE 20

Section

MATERIAL SCIENCE

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.