The use of the method of simulation modeling to estimate the effect of structure parameters on the wear resistance of the bearings of the motors of electric locomotives

Authors

  • T. M. Meshcheriakova Lviv branch of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine
  • M. O. Kuzin Institute of applied problems of mechanics and mathematicsnamed after. Ya. S. Podstryhach National Academy of Science of Ukraine, Ukraine

DOI:

https://doi.org/10.15802/stp2008/15833

Keywords:

simulation modeling, wear resistance, electric locomotives

Abstract

A method of structure simulation was used to investigate the influence of the hard phase quantity on parameters of the wear resistance of antifriction alloy B16. A method of optimization of linear intensity of wear depending on the quantitative correlation between the structural components is developed; the calculation data obtained correlate with the results of the wear resistance tests.

Author Biographies

T. M. Meshcheriakova, Lviv branch of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

T. M. Meshcheriakova

M. O. Kuzin, Institute of applied problems of mechanics and mathematicsnamed after. Ya. S. Podstryhach National Academy of Science of Ukraine

M. O. Kuzin

Published

2008-04-25

How to Cite

Meshcheriakova, T. M., & Kuzin, M. O. (2008). The use of the method of simulation modeling to estimate the effect of structure parameters on the wear resistance of the bearings of the motors of electric locomotives. Science and Transport Progress, (21), 272–278. https://doi.org/10.15802/stp2008/15833

Issue

Section

MATERIAL SCIENCE