INFLUENCE OF THE LONGITUDINAL AND TRANSVERSE DISPLACEMENT OF THE CARGO GRAVITY CENTER IN GONDOLA CARS ON THEIR DYNAMIC INDICATORS
DOI:
https://doi.org/10.15802/stp2018/146432Keywords:
cargo, gondola cars, dynamic indicators, curved track sections, longitudinal and transverse displacement of the gravity center, gravity center, movement speedAbstract
Purpose. Increase in the movement speed of railway vehicles makes it possible to strengthen integration processes with the countries of Europe and Asia and leads to the need to improve control, to quantify the dynamic load of rolling stock to ensure safe and reliable communication on the railways. Therefore, in the process of design and operation of rolling stock, the quantitative assessment of dynamic loads constitutes an urgent scientific and technical task. The purpose of this paper is to investigate the effect of longitudinal and transverse displacement of the cargo gravity center in gondola cars during movement speed increase on their main dynamic indicators –the horizontal and vertical dynamics coefficients, the derailment stability coefficient. Methodology. The study was carried out by the method of mathematical and computer simulation of the dynamic loading of freight gondola car using the model of spatial oscillations of the five cars coupling and the software complex developed in the branch research laboratory of dynamics and strength of rolling stock (BRL DSRS) of the Dnepropetrovsk National University of Railway Transport named after Academician V. Lazaryan. Theoretical studies were carried out during the movement of the 12-532 gondola car model with typical bogies 18-100 with speeds in the range from 50 to 90 km/h in curves with radii of 350 and 600 m, with increases of the outer rail 130 and 120 mm, respectively. Findings. The article presents analysis of the carried out theoretical researches of dynamic qualities of rolling stock using the example of gondola cars. Calculations are performed using the package of applied programs with sufficient accuracy for practice. When performing the theoretical studies and after modeling, taking into account the processes of oscillation of the freight car and cargo at the longitudinal and transverse displacement of its gravity center in the gondola car, the dependences of the main dynamic parameters taking into account the movement speed were obtained. Originality. The article investigates the effect of longitudinal and transverse displacement of the load's gravity center on the dynamic loading of the car in order to solve the problem of forecasting the rolling stock dynamics. The results of theoretical studies taking into account the movement speed in curved track sections of small and medium radius. Practical value. The article has a practical focus. Application of the results will contribute to improving the traffic safety of freight cars and will improve the technical and economic performance of the railway transport.
References
Vagony gruzovye. Trebovaniya k prochnosti i dinamicheskim kachestvam, 54 GOST 33211-2014 (2016). (in Russian)
Danovich, V. D., & Malysheva, A. A. (1998). Mathematical Model of Spatial Oscillations of the Coupling of Five Cars Moving Along a Rectilinear Section of the Track. Transport. Stress Loading and Durability of a Rolling Stock, 62-69. Dnepropetrovsk. (in Russian)
Vahony vantazhni mahistralnykh zaliznychnykh dorih kolii1520 mm. Zahalni vymohy shchodo za-bezpechennia zberezhennia pid chas zavantazhuvalno-rozvantazhuvalnykh ta manevrovykh robit, 20 DSTU GOST 22235:2015 (2015). (in Ukrainian)
Vahony vantazhni. Vymohy do mitsnosti ta dynamichnykh yakostei, 58 DSTU 33211:2017 (2017). (in Ukrainian)
Zbirnyk № 17 Pravyl perevezennia i taryfiv zaliznychnoho transportu Ukrainy. (2005). Kуiv: SAM. (in Ukrainian)
Shvets, A. A., Zheleznov, K. I., Akulov, A. S., Zabolotny, A. N., & Chabanyuk, E. V. (2016). Determination the permissible forces in assessing the lift resistant factor of freight cars in trains. Science and Transport Progress, 1(61), 189-192. doi: 10.15802/stp2016/61045 (in Russian)
Pravyla vyznachennia pidvyshchennia zovnishnoi reiky i vstanovlennia dopustymykh shvydkostei v kryvykh diliankakh kolii. TsP 02336. (2013). Kуiv: Ukrzaliznytsia. (in Ukrainian)
Romanov, A. N., Girevka, F. I., & Zavorotny, D. G. (2007). Opredelenie smeshcheniya tsentra tyazhesti gruza v zheleznodorozhnom vagone. PiKAD: Promyshlennye izmereniya, kontrol, avtomatizatsiya, diagnostika, 3, 34-35. (in Russian)
Tekhnicheskie usloviya razmeshcheniya i krepleniya gruzov v vagonakh i konteynerakh. (2003). Moscow: Yurtrans. (in Russian)
Shvets, A. O. (2018). Analysis of Design Tools and Methods to Improve Designs of Freight Rolling Stock. Visnyk sertyfikatsii zaliznychnoho transportu, 02(48), 61-73. (in Ukrainian)
Shvets, A. O. (2018). Osoblyvosti vyznachennia momentiv inertsii kuzoviv vantazhnykh vahoniv. Visnyk sertyfikatsii zaliznychnoho transportu, 5(51), 20–34. (in Ukrainian)
Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests, 118 BS EN 14363:2005 (2005). (in English)
Railway applications. Testing and Simulation for the acceptance of running characteristics of railway vehicles. Running Behavior and stationary tests, 198 BS EN 14363:2016 (2016). (in English)
Shvets, A. A., Zhelieznov, K. I., Akulov, A. S., Zabolotnyi, A. N., & Chabaniuk, Ye. V. (2015). Determination of the issue concerning the lift resistance factor of lightweight car. Science and Transport Progress, 6 (60), 134-148. doi: 10.15802/stp2015/57098 (in English)
Blokhin, E. P., Pshinko, O. M., Danovich, V. D., & Korotenko, M. L. (1998). Effect of the state of car running gears and railway track on wheel and rail wear. Railway Bogies and Running Gears: Proceedings of the 4th International Conference (рр. 313-323). Budapest. (in English)
Skrúcaný, T., Vrábel, J., Kendra, M., & Kažimír, P. (2017). Impact of cargo distribution on the vehicle flatback on braking distance in road freight transport. MATEC Web of Conferences: 18th International Scientific Conference – LOGI 2017 (19 Oct. 2017, Czech Republic), 134. doi: 10.1051/matecconf/201713400054 (in English)
Navarrete, J. A., & Otremba, F. (2016). Experimental and theoretical modeling of cargo sloshing during braking. ASME International Mechanical Engineering Congress and Exposition (Phoenix, Arizona, USA, Nov. 11-17, 2016). Dynamics, Vibration, and Control, 4B. Phoenix. doi: 10.1115/imece2016-65698 (in English)
Ramos, A. G., Silva, E., & Oliveira, J. F. (2018). A new load balance methodology for container loading problem in road transportation. European Journal of Operational Research, 226(3), 1140-1152. doi: 10.1016/j.ejor.2017.10.050 (in English)
Transit cooperative research program Report 71. Track-Related Research. Volume 5: Flange Climb Derailment Criteria and Wheel/Rail Profile Management and Maintenance Guidelines for Transit Operations. (2005). Washington: Transportation Research Board. (in English)
Turanov, K. (2015). Mathematical Modeling of Cargo Motion Crosswise the Wagon under the Action of Plane Force System. Science and Technology, 5(1), 5-14. (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.