Evaluation of quality indicators contacting the surface of the tribological system «Wheel – Rail»
DOI:
https://doi.org/10.15802/stp2013/14529Keywords:
microirregularity, roughness, contact, deformation, loadAbstract
Purpose. Modern ideas about the contact interaction of bodies in friction are based on models that take into account the geometric parameters of the surface layers constituting tribosystems. These models provide a high level of adequacy to describe the features of the relief of the surfaces of parts and their impact on the performance characteristics of friction in the elastic stresses. However, the possibility of plastic deformations in the surface layers, particularly before using friction systems, these models do not account for. The aim of this work is the development of new mathematical approaches previously applied accounting strains and their effect on the performance of tribosystems. Methodology. Using the contact mechanics approaches analyzed the influence of preload on contacting a flat rough surfaces using a model based on the assumption of normal distribution of heights and roughness of plastic deformation at the first load. Findings. Analytically determined that under moderate pressure reduction from baseline, the actual contact area is proportional to the pressure in the 2/3 power. Originality. It is found that the contact patch size is proportional to the pressure of the first load. Practical value. It is established that at pressures lower than originally applied to the contact surfaces, the high values of the actual surface contact, the number of patches of actual contact are typical, than for the same pressure at the first load.
References
Aleksandrov V.M., Chebakov M.I. Vvedeniye v mekhaniku kontaktnykh vzaimodestviy [Introduction in to mechanics of contact interaction]. Rostov-na-Donu, JSC «CVVR» Publ., 2007. 114 p.
Vakulenko I.O. Vtoma metalevykh materialiv v konstruktsiiakh rukhomoho skladu [Fatigue of metal materials in constructions of rolling stock]. Dnipropetrovsk, Makovetskyi Publ., 2012. 152 p.
Volkov I.A., KorotkikhYu.G. Uravneniye sostoyaniya vyazkouprugoplasticheskikh sred s povrezhdeniyami [State equation of viscoelastic-plastic medium with damages]. Moscow, Mir Publ., 1984. 624 p.
Kuzin M.O. Matematychne modeliuvannia parametriv vtomnoi mitsnosti strukturno-neodnoridnykh metalichnykh system [Mathematical simulation of fatigue strength parameters in structural non-uniform metallic systems]. Vіsnyk Dnіpropetrovskoho natsіonalnoho unіversitetu zalіznychnoho transportu іmenі akademіka V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2011, issue 38, pp. 213-219.
Kuzin O.A. Rol struktury v protsesakh znoshuvannia feryto-perlitnykh stalei [The role of structure in the ferrite-pearlitic steel wear processes]. Vіsnyk Dnіpropetrovskoho natsіonalnoho unіversitetu zalіznychnoho transportu іmenі akademіka V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2011, issue 37, pp. 224-229.
Kulichenko A.Ya. Metodyka vyznachennia yakisnykh kharakterystyk poverkhni metalu, obroblenoi instrumentom z hnuchkymy robochymy elementamy [Feature finding of metal surface qualitative characteristics, treated by instrument with flexible working elements]. Transportni systemy i tekhnolohii [Transport systems and technologies], 2007, issue 11, pp. 67-69.
Kulichenko A.Ya. Optymizatsiya parametriv tochnosti pry vyhotovlenni ta remonti detaley zasobiv transportu [Parameter optimization of accuracy at components of transport equipment making and repair]. Zaliznychnyi transport Ukrayiny – Railway transport of Ukraine, 2008, no. 1, pp. 38-39.
Troshchenko V.T. Prochnost materialov i konstruktsiy [Strength of materials and constructions]. Kiev, Akademperiodika Publ., 2005. 1088 p.
Sokol Ye.N. Zheleznodorozhno-transportnoye proisshestviye i yego mekhanizm [Railway accident and it mechanism]. Lvov, Paіs Publ., 2011. 376 p.
Shakhunyants G.M. Zheleznodorozhnyye puti [Railway lines]. Moscow, Transport Publ., 1987. 479 p.
Catalin Alexandru. Modeling and simulation in engineering. Rijeka, 2012. 312 p.
Popov V. Contact Mechanics and Friction. Springer, 2010. 368 p.
Zavarise G., Wriggers P. Trends in Computational Contact Mechanics. Springer, 2011. 354 p.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
