IMPROVING ΤΗΕ MECHANICAL SYSTEM OF ΤΗΕ ELECTRODΕ HOLDER TO REDUCE ELECTRODE VIBRATION
DOI:
https://doi.org/10.15802/stp2018/141009Keywords:
mechanism for moving the electrode, balanced electrode holder, dynamic system, electrodynamic effect, oscillation, amplitudeAbstract
Purpose. The article is aimed: 1) to develop a mathematical model and to determine the dynamic parameters of a mechanical system of balanced electrode holder of electric arc furnace; 2) to perform a comparative estimation of the maximum amplitudes and the nature of forced and free decaying oscillations of the electrode in the horizontal plane after the electrodynamic load drop for the balanced electrode and the electrode holder with a rigid mount of the sleeve to the rack; 3) to determine the characteristics of the dry friction damper based on the orthogonal wedge mechanism with the initial tension of the linear elastic elements, subject to the possible amplitudes and frequencies of oscillations of the electrode holder Methodology. The solution is carried out by the methods of theoretical mechanics and the theory of oscillations, dynamic analysis of the electrode holder mechanical system taking into account non-stationary electrodynamic excitation. Simulation of mechanical oscillations of the electrode in the horizontal plane was carried out by means of MathCAD Findings. The dynamical system of the balanced electrode holder of three-phase electric arc furnace on the basis of a double physical pendulum with elastic dissipative bonds is considered. The parameters of the dynamic model and electrodynamic excitation of oscillations are determined. Differential equations of forced oscillations of a dissipative system with two degrees of freedom are formulated. The mathematical modeling of forced and free oscillations of an electrode in a horizontal plane is executed. Originality. The dynamic synthesis of the balanced electrode holders of the electric arc furnace is carried out for the first time, taking into account the possible electrodynamic effects on the current-carrying elements of the bearing structure and the electrode. Dynamic synthesis and analysis of such structures of electrode holders was not performed before. Practical value. Practical recommendations and analytical dependencies for choosing the dynamic parameters of mechanical system of balanced electrode holder under condition of minimum deviation of the electrode from the initial position in the horizontal plane are developed. The design of dry friction damper based on orthogonal wedge mechanism with linear elastic elements and their initial tension is proposed.
References
Bershitskiy, I. M., Voennyy, V. A., & Nikulin, A. A. (2001). Elektrododerzhateli dugovykh pechey. Elektrometallurgiya, 5, 22-28. (in Russian)
Biderman, V. L. (1980). Teoriya mekhanicheskikh kolebaniy: Uchebnik dlya vuzov. Moscow: Vysshaya shkola. (in Russian)
Blekhman, I. I. (Ed). (1979). Kolebaniya nelineynykh mekhanicheskikh system. Vibratsii v tekhnike: spravochnik: in 6 Vol. (Vol. 2, 351 p.). Moscow: Mashinostroenie. (in Russian)
Vlasov, A. A., & Zdanevich, S. V. (2018). Issledovanie dinamicheskoy sistemy balansirnogo elektrododerzhatelya dugovoy stale-plavilnoy pechi. System Technologies, 4(117), 10-18. (in Russian)
Vlasov, О. A., & Zdanevich, S. V. (2017). Vybir zhorstkosti pruzhnykh elementiv hasytelia kolyvan balansyrnoho elektrodotrymacha duhovoi staleplavylnoi pechi. Teoryia y praktyka metallurhyy, 1-2, 77-81. (in Ukranian)
Gidaspov, I. A. & Veyts, V. L. (1987). Dinamika samotormozyashchikhsya mekhanizmov. Leningrad. (in Russian)
Goreva L. P., Bikeev R. A., & Vlasov D. S. (2012). Electrodynamic Interactions in Arc Steel Furnaces. Izvestiya Vysshikh Uchebnykh Zavedenii. Elektromekhanika (Russian Electromechanics), 6, 55-58. (in Russian)
Grezina, A. V. (2004). Matematicheskoe modelirovanie dinamiki sistemy elektrododerzhateley dugovykh staleplavilnykh pechey. Vestnik Saratovskogo gosudarstvennogo tekhnicheskogo universiteta, 4,5-10. (in Russian)
Marushchak, Y. Y., & Kushnir, A. P. (2016). Matematicheskaya model mekhanizma peremeshcheniya elektrodov dugovoy staleplavil-noy pechi na osnove predstavleniya Denavita-Khartenberga. Electrotechnic and Computer Systems, 22(98), 20-27. (in Russian)
Vlasov, A.O., Koval, M.V., Zhuk, A.Y., Lebedeva, Y.V., Beliaev, S.Y., & Beinyk, V.V. (2001). UA Patent No. 43610A. Kyiv: Ukrainskyi instytut intelektualnoi vlasnosti (Ukrpatent). (in Ukranian)
Koval, M. V., Tarasov, V. K., Pylypenko, S. S., Yehorov, Y. P., & Vlasov, A. O. (2016). Pro pidvyshchennia nadiinosti roboty elektrodiv duhovykh staleplavylnykh pechei. Metalurhiia: zbirnyk naukovykh prats, 1(35), 58-62. (in Ukranian)
Sapko, A. I. (1980). Ispolnitelnye mekhanizmy regulyatorov moshchnosti dugovykh elektropechey. Moscow: Energiya. (in Russian)
Turpaev, A. I. (1976). Samotormozyashchie mekhanizmy. Moscow: Mashinostroenie. (in Russian)
Brusa, E. G. M., Franceschinis, E., & Morsut, S. (2009). Compact Modeling of Electric Arc Furnace Electrodes for Vibration Analysis, Detection and Suppression. Computer Modeling in Engineering and Sciences, 42(2), 75-106. (in English)
Brusa, E. G. M., & Morsut, S. (2015) Design and Structural Optimization of the Electric Arc Furnace Through a Mechatronic-Integrated Modeling Activity. IEEE/ASME Transaction on Mechatronics, 20(3), 1099-1107. doi: 10.1109/TMECH.2014.2364392 (in English)
Grygorov, P., Hovestadt, E., Jepsen, O. N., Odenthal, H. J., & Theobald F. (2012). Computer modeling and experimental validation of an electric arc furnace, 10th European Electric Steelmaking Conference, September.Graz. Retrieved from https://www.researchgate.net/publication/279206081 (in English)
Gerhan, R. E., Krotov, Y., & Lugo, N. (2010). Secondary system mechanical resonance in new tall-shell SDI-butler arc furnaces: Detection and solutions, AISTech Conference: Iron and steel technology conference proceeding, May 3-6,Pittsburgh,Pa.,USA.Pittsburgh. (in English)
Lupi, S. (2017). Fundamentals of Electroheat, Electrical Technologies for Process Heating. Springer Internatonal Publishing Switzerland. doi: 10.1007/978-3-319-46015-4 (in English)
Nikolaev, A. A., Tulupov, P. G., & Savinov, D. A. (2017). Mathematical model of electrode positioning hydraulic drive of electric arc steel-making furnace taking into account stochastic disturbances of arcs, International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM), 16-19 May. Saint Petersburg, Russia. doi: 10.1109/ICIEAM.2017.8076205 (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
