METHODOLOGY OF DETERMINING THE PARAMETERS OF TRACTION ELECTRIC MOTOR FAILURES WHEN OPERATING TROLLEYBUSES
DOI:
https://doi.org/10.15802/stp2018/140707Keywords:
electric transport, traction electric motor, diagnosing, operating reliability, failure rateAbstract
Purpose. The work is aimed to study the change in parameters of traction electric motors of trolleybuses during operation and improvement of the technical state control system, using modern diagnostic methods. Methodology. Solution of the scientific problem is based on the control of technical state and change in the parameters of traction electric motors in the process of operation. For analysis of operational factors, we used the method of mathematical statistics and probability theory. Mathematical modelling and design of experiment, multifactor regression analysis provides an assessment of the reliability of the electric traction motor elements. Physical and statistical methods provide for research and detection of patterns of influence of the factors that accelerate the wear of parts. This allows us to generate models of system reliability that take into account the influence of operational factors on the reliability. Findings. As a result of the studies we obtained quantitative characteristics of the reliability of commutator and established that the failures of traction motors make up 20% of all failures of electrical equipment. We analysed the operation conditions of traction electric motors and determined the failure distribution law N{mx,sx}, which allows assessing the progression between gradual failures. We obtained a mathematical model characterizing the object operation. A generalized equation of the failure rate of elements for traction electric motor (TEM) was found. We improved the estimation methods of reliability of TEM element base that makes it possible to determine the ETM lifetime taking into account the features of each trolleybus. We established the failure rate of commutators using physical and statistical methods. Originality. For the first time, the choice of physico-statistical methods of simulation and reliability calculation was substantiated. We determined the regularities of change in parameters of the trolleybus traction electric motor elements, which makes it possible to control the processes of their wear in the operation conditions. We developed a mathematical model for estimating the traction electric motor reliability, based on a system analysis of the probabilities of failures of subsystems to be diagnosed. Practical value. Based on the results of the study, we developed practical recommendations for rational choice of diagnostic parameters of traction motors. Their implementation at the enterprises of electric transport will increase reliability of electric motors in general up to 10%. It is proposed to use the results of the work in the educational process and in the research work of students at the Department of Electric Transport of the O.M. Beketov National University of Urban Economy in Kharkiv. The developed methodology for determination of parameters of traction electric motors when operating trolleybuses allows assessing the reliability of any type of trolleybus traction motor.References
Esaulov, S. M., Babicheva, O. F., & Lukashova, N. P. (2017). Research and development of the charger of a su-percapacitor for the recovery of braking energy of an electric drive in transport. Municipal economy of cities. Series: «Engineering science and architecture», 135, 132-140. (in Russian)
Daleka, V. K., Budnychenko, V. B., Kovalenko, V. I., Khvorost, M. V., & Isaiev, L. O. (2014). Pravyla ekspluatatsii miskoho elektrychnoho transportu: Navchalnyi posibnyk. Kharkiv: KhNUMH. (in Ukranian)
Lukyanov, S. I., Karandaev, A. S., & Yevdokimov, S. A. (2014). Razrabotka i vnedrenie intellektualnykh sistem diagnostirovaniya tekhnicheskogo sostoyaniya elektri-cheskogo oborudovaniya. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G. I. Nosova, 1(45), 129-136. (in Russian)
Zubenko, D. Y., Kovalenko, A. V., Petrenko, O. M., Shavkun, V. M., & Olekhno, M. Y. (2016). Rozrobka enerhomekhanichnoi ustanovky dlia tiahy elektromobilia. Science Rise, 10, 2(27), 6-15. doi: 10.15587/2313-8416.2016.79196 (in Ukranian)
Daleka, V. K., Khvorost, M. V., Skurikhin, V. I., & Skurikhin, D. I. (2018). Rukhomyi sklad miskoho elektrychnoho transportu. Mekhanichna chastyna: Navchalnyi posibnyk. Kharkiv: KhNUMH imeni O. M. Beketova. (in Ukranian)
Skurikhin, V. I. (2014). Modelirovanie iznashivaniya poverkhnostey treniya uzlov i detaley mashin. Problemy ta perspektyvy rozvytku tekhnichnykh zasobiv transportu ta system avtomatyzatsii: Materialy Mizhnarodnoi naukovo-tekhnichnoi konferentsii, 42-43. (in Russian)
Soroka, K. O., & Lychov, D. A. (2015). The content model and the equations of motion of electric vehicle. Science and Transport Progress, 3(57), 97-106. doi: 10.15802/stp2015/46056 (in Ukranian)
Soroka, K. O., Pavlenko, T. R., & Lychov, D. A. (2017). System for automatic selection of the speed rate of electric vehicles for reducing the power consumption. Science and Transport Progress, 3(69). 77-91. doi: 10.15802/stp2017/104360 (in Ukranian)
Daleka, V. K., Budnychenko, V. B., Karpushyn, E. Y., & Kovalenko, V. I. (2014). Tekhnichna ekspluatatsiia miskoho elektrychnoho transportu: Navchalnyi posibnyk. Kharkiv: KhNUMH. (in Ukranian)
Shavkun, V. M., Miziak, O. V. (2017). Vyznachennia optymalnykh rezhymiv diahnostuvannia transportnykh zasobiv. Avtomobil i elektronika. Suchasni tekhnolohii, 12, 193-198. Retrieved from http://www.khadi.kharkov.ua/fileadmin/P_SIS/AE17_2/5.2.pdf (in Ukranian)
Shavkun, V. M. (2014). Diagnostics of electric transport traction electric machines. Eastern-European Journal of Enterpraise Technologies, 1, 7(67), 48-53. (in Ukranian)
Yatsun, M. A., & Yatsun, A. M. (2010). Ekspluatatsiia ta diahnostuvannia elektrychnykh mashyn i aparativ. Lviv: Lvivska politekhnika. (in Ukranian)
Aminu, M, Ainah, R. K., Abana, M., & Abu, U. A. (2018). Identification of induction machine parameters using only no-load test measurements. Nigerian Journal of Technology, 37(3), 742. doi: 10.4314/njt.v37i3.25 (in English)
Kolcio, K., & Fesq, L. (2016). Model-based off-nominal state isolation and detection system for autonomous fault management. IEEE Aerospace Conference Proceedings. doi: 10.1109/AERO.2016.7500793 (in English)
Kuznetzov, A., Skurikhin, V., & Shavkun, V. (2018). Resource saving reserves of determining characteristics of the long steering wall of wagon of the metro. EUREKA: Physical Sciences and Engineering, 1, 19-28.doi: 10.21303/2461-4262.2018.00525 (in English)
Pavlenko, T., Shavkun, V., & Petrenko, A. (2017). Ways to improve operation reliability of traction electric motors of the rolling stock of electric transport. Eastern-European Journal of Enterpraise Technologies, 5, 8(89), 22-30. doi: 10.15587/1729-4061.2017.112109 (in English)
Zubenko, D., & Kuznetzov, A. (2016). Designing intelligent systems management transport enterprises entropy approach. EUREKA: Physics and Engineering, 1, 49-54. doi: 10.21303/2461-4262.2016.00025 (in English)
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Т. P. Pavlenko, V. M. Shavkun, V. I. Scurihin, N. P. Lukashova
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.