INTRODUCTION THE NEW WELDING TECHNOLOGIES AND MATERIALS FOR WELDING ROLLED METAL BY HIGHER DURABILITY

Authors

  • O. H. Synieok The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev, Ukraine
  • A. M. Herasymenko The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev, Ukraine
  • V. D. Riabokon The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev, Ukraine
  • K. V. Riabtsev The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev, Ukraine
  • K. Yu. Korzin The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev, Ukraine
  • O. V. Zdorenko LLL «ESAB», Ukraine

DOI:

https://doi.org/10.15802/stp2010/13332

Keywords:

welding materials, welding technology, welding rolled metal

Abstract

Welding materials, which are as a rule used for making the responsible metal constructions, do not always meet the high indices of rolled steel properties of durability classes С355-490 MPa. In the paper the research results of application of welding materials produced by the firm «ESAB» for the automatic flux welding of rolled steel 06Г2Б ТУ В 27.1-05416923-085:2006 are presented.

Author Biographies

O. H. Synieok, The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev

O. H. Synieok

A. M. Herasymenko, The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev

A. M. Herasymenko

V. D. Riabokon, The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev

V. D. Riabokon

K. V. Riabtsev, The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev

K. V. Riabtsev

K. Yu. Korzin, The E.O. Paton Electric Welding Institute Of The National Academy Of Sciences Of Ukraine, Kiev

K. Yu. Korzin

O. V. Zdorenko, LLL «ESAB»

O. V. Zdorenko

Downloads

Published

2010-08-25

How to Cite

Synieok, O. H., Herasymenko, A. M., Riabokon, V. D., Riabtsev, K. V., Korzin, K. Y., & Zdorenko, O. V. (2010). INTRODUCTION THE NEW WELDING TECHNOLOGIES AND MATERIALS FOR WELDING ROLLED METAL BY HIGHER DURABILITY. Science and Transport Progress, (33), 245–250. https://doi.org/10.15802/stp2010/13332

Issue

No. 33 (2010): ISSUE 33

Section

TRANSPORT CONSTRUCTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.