ДОСЛІДЖЕННЯ РАЦІОНАЛЬНИХ ХАРАКТЕРИСТИК КАНАЛІВ ПЕРЕДАЧІ ДАНИХ ІНФОРМАЦІЙНО-ВИМІРЮВАЛЬНОЇ СИСТЕМИ

I. A. Kliushnyk

doi:10.15802/stp2018/120156

Authors

I. A. Kliushnyk Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0001-9939-0755

DOI:

https://doi.org/10.15802/stp2018/120156

Keywords:

simulation model, MATLAB, SIMULINK, hydraulic transmission, hydrotransmission tests, test stand, information-measuring system

Abstract

Purpose. The article focuses on determining the rational parameters of data transmission interfaces for information and measuring system for testing the hydraulic transmissions, as well as determining the degree of fault to-lerance in various operating modes of the system. Methodology. In the study the researcher has determined and theoretically calculated the main characteristics of the data transmission channels from the hardware converters of the data signals of analog sensors of technological parameters to the computer. For a more complete assessment, an imitation model was created in the MATLAB environment to study the assigned task. Analysis of the results obtained from the theoretical calculations and using the simulation data model to determine the rational settings of interfaces (rational transmission speed, rational element base, rational system structure, etc.) of data transmission makes it possible to determine the rational characteristics of the system. Findings. For the existing information-measuring system for testing hydraulic locomotive transmission of diesel locomotives, studies were carried out to determine and theoretically calculate the main characteristics of the data transmission channels from the hardware converters of data signals from analog sensors of technological parameters to the computer. To study the tachometric subsystem, an imitation model was created that allowed to investigate the main characteristics of the data transmission channels from the hardware converters of data signals of analog sensors of tachometric parameters to the computer. The results of theoretical calculations were analyzed and the rational settings of the data transmission system were determined using the simulation model of data. Originality. The study to determine and theoretically calculate the main characteristics of the data transmission channels from the hardware converters of data signals of analog sensors of technological parameters to the computer showed that the system operates in the mode of actual «non-maintenance». For more detailed studies of the processes occurring in the transmission system of tachometric data, an imitation model was created in the Matlab environment. This model allowed carrying out a number of experiments. Practical value. On the basis of experiments with the model, rational ways of solving the existing problem of the system operation in the mode of actual «non-maintenance» were established. Also, the introduction of one of the proposed methods for solving the problem or combining them requires further research in the real system

Author Biography

I. A. Kliushnyk, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep. «Electronic Computers», Dnipropetrovsk National University of Railway Transport named after Academician
V. Lazaryan, Lazaryan St., 2, Dnipro, Ukraine, 49010,
tel. +38 (056) 373 15 89,
e-mail klugran@i.ua

References

Belashov, V. Y., & Asadullin, A. I. (2012). Mobilnyy eksperimentalnyy kompleks dlya issledovaniya elektromagnitnykh poley, generiruemykh elektrooborudovaniem i elementami elektroenergeticheskikh sistem. Promyshlennaya energetika, 8, 52-55. (in Russian)

Bratukha, M. A., & Shevchenko, O. G. (2012). Issledovanie tochnosti otscheta vremennykh intervalov v sisteme windows. Informatyka ta kompiuterni tekhnolohii-2012: materialy VIII Mizhnarodnoi naukovo-tekhnichnoi konferentsii studentiv, aspirantiv ta molodykh naukovtsiv, 59-63. (in Russian)

Bodnar, B. Y., Ochkasov, O. B., Koreniuk, R. O., & Kliushnyk, I. A. (2017). Vykorystannia metodu vilnoho vybihu pry vyznachenni mekhanichnykh vtrat v hidravlichnykh peredachakh pry stendovykh vyprobuvanniakh. Abstracts of the 77 International Scientific & Practical Conference “The Problems and Prospectsof Railway Transport Development”, 16-17. (in Ukrainian)

Esaulenko, V. A., & Nikoryuk, N. S. (2006). Metodika i algoritm rascheta perekhodnykh protsessov v dvigatele postoyannogo toka posledovatelnogo vozbuzhdeniya. Transactions of Kremenchuk Mykhailo Ostrohradskyi National University, 3(2), 137-139. (in Russian)

Zhukovytskyy, I. V., Kliushnyk, I. A., Ochkasov, O. B., & Korenyuk, R. O. (2015). Information-measuring Test System of Diesel Locomotive Hydraulic Transmissions. Science and Transport Progress, 5(59), 53-65. doi: 10.15802/stp2015/53159. (in Russian)

Kołek, K. (2013). Windows7 x64 as real-time measurement and control platform. Przegląd Elektrotechniczny, 89(2a), 68-71. (in English)

Sellappan, P. (2017). Response Time Considerations in Realtime Software Design. Malaysian Journal of Computer Science, 9(1), 25-31. (in English)

Urrea, C., Morales C., & Kern, J. (2016). Implementation of error detection and correction in the Modbus-RTU serial protocol. International Journal of Critical Infrastructure Protection, 15, 27-37. doi: 10.1016/j.ijcip.2016.07.001. (in English)

Zhukovytskyy, I., & Kliushnyk, I. (2017). Choice of the Optimal Parameters of Measuring the Shaft Rotation Frequency of the Hydraulic Transmission of the Locomotive Using Microcontroller. Science and Transport Progress, 2(68), 36-45. doi: 10.15802/stp2017/99945. (in English)

Zhukovytskyy, I. V., & Kliushnyk, I. A. (2016). Use of Microcontroller for Measuring Shaft Speed of Diesel Locomotive Hydraulic Transmission. Science and Transport Progress, 5(65), 43-53. doi: 10.15802/stp2016/83990. (in English)