DETERMINATION OF THE LOADING OF CONTAINERS IN MIXED TRAINS WHEN TRANSPORTING BY TRAIN FERRIES
DOI:
https://doi.org/10.15802/stp2017/118993Keywords:
container, bearing structure, dynamics, modeling, structural loading, railway ferry transportationsAbstract
Purpose. The study is aimed at determination of the loading of containers in mixed trains when transporting by train ferries. Methodology. In order to achieve the objective the author studied accelerations (as components of the dynamic load) influencing the bearing structure of a 1CC standard container located on a flat car during transportation by train ferry. In order to determine accelerations influencing the bearing structure of a container, a mathematical model of the container’s movements under train ferry oscillations was made. The model considered angular displacements of a train ferry relative to the longitudinal axis (bank) as being the maximum load on the bearing structure, as well as changes in the container stability relative to the flat car frame. While working out the motion equations three diagrams of interrelation between the container and the flat car located on the train ferry deck were considered: 1) absence of displacements of the flat car and containers relative to the initial place under the train ferry oscillations; 2) with displacements of the flat car under the train ferry oscillations when containers are immovable relative to the flat car frame; 3) with displacements of the flat car relative to the deck and relative to the flat car frame. The differential equations of motion were solved in Mathсad taking into account their reduction to a normal Cauchy problemwith a subsequent integration by the Runge–Kutta method. Findings. Refined values of accelerations influencing the bearing structure of containers located on the flat car while transporting by train ferry were obtained. Originality. The mathematical models of displacements of container bearing structures located on a flat car while transporting by train ferry were proposed. Practical value. The results of investigations can be applied for designing bearing structures of new generation containers, besides they may improve the efficiency of mixed transportation along the international transport corridors.
References
Konteynery dlya perevozki opasnykh gruzov. Trebovaniya po ekspluatatsionnoy bezopasnosti. GOST 31232 (2005). (in Russian)
Konteynery universalnyye. Obshchiye tekhnicheskiye usloviya. GOST 20259-80 (2002). (in Russian)
Konteynery universalnye. Tipy, osnovnyye parametry i razmery. GOST 18477-79 (2004). (in Russian)
Fitingi uglovye krupnotonnazhnykh konteynerov. Konstruktsiya i razmery. GOST 20527-82 (2004). (in Russian)
Lovskaya, A. O., Fomin, O. V., Okorokov, A. M. & Melnychuk, O. M. (2015). Research of a tank-container strength of improved construction using the computer simulation of operating conditions. Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, 2, 180-188. (in Ukrainian)
Dyakonov, V. (2000). MATHCAD 8/2000. Saint Petersburg, SPb: Piter. (in Russian)
Kiryanov, D. V. (2006). Mathcad 13. Saint Petersburg, SPb: BHV. (in Russian)
Lukin, V. V., Shadur, L. A., Koturanov, V. I., Hohlov, A. A., & Anisimov, P. S. (2000). Konstruirovaniye i raschet vagonov. Moscow: UMK MPS Rossii. (in Russian)
Lovskaya, A., Fomin, O., & Melnichuk, O. (2015). Improvement of tank containers for petroleum products transportation using round pipes as their supporting structures. Railway Transport of Ukraine, 1, 40-44. (in Ukrainian)
Myamlin, S. V., Kebal, Yu. V,. & Kondratyuk, S. M. (2012). Perspektivnyye konstruktsii konteynerov-tsistern dlya perevozki svetlykh nefteproduktov, ammiaka i uglevodorodnykh gazov. Railway Transport of Ukraine, 2, 44-46. (in Russian)
Lisowski, Е., & Czyzycki, W. (2011). Transport and storage of lng in container tanks. Journal of KONES Powertrain and Transport, 18(3), 193-201. (in English)
Lisowski, E., Czyżycki, W., & Łazarczyk, K. (2012). Wdrożenie produkcji cystern kontenerowych do transportu i przechowywania gazów skroplonych. Biuletyn Instytutu Spawalnictwa w Gliwicach, 56(2), 25-31. (in Polish)
Jarno, Föhr, Kalle, Karttunen, Johanna, Enström, Tomas, Johannesson, & Tapio, Ranta (2015). Metal and Composite Intermodal Containers in Comparative Cold Tests with Wood Chips. Journal of Sustainable Bioenergy Systems, 5, 32-39. (in English)
Ghita, Mirela C, Micu, Constantin A, Talu, Mihai D L, & Talu, Stefan D L. (2013). 3d modelling of a shrink fitted concave ended cylindrical tank for automotive industry Acta Technica Corviniensis. Bulletin of Engineering, 6(4), 87-92. (in English)
Fomin, O. V. (2015). Increase of the freight wagons ideality degree and prognostication of their evolution stages. Scientific Bulletin of National Mining University, 2, 68-76. (in English)
Fomin, O. V. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Metallurgical and Mining Industry, 5, 31-43. (in English)
Wojciech czyżycki modeling of heat flow through multilayer internal supports of cryogenic vessels (2015). Technical transportations, 2, 27-34. (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.